Specifications
Return Policy |
This product cannot be cancelled or returned once the order has been processed. |
Frame Size |
1.1 in |
Motor Length |
1.57 in. |
Speed-Torque Characteristics |
 Speed-Torque Characteristics |
Holding Torque |
13.7 oz-in |
Type |
High-Torque |
Shaft/Gear Type |
Round Shaft (No Gearhead) |
Encoder |
Equipped |
Power Supply |
20 ~ 40 VDC |
Current |
1.7 A |
Shaft |
Single |
Basic Step Angle |
1.8º |
Rotor Inertia |
0.066 oz-in² |
RoHS Compliant |
Yes |
Components |
PK224PDAR15 [Motor] RBD215A-K [Driver] |
Insulation Resistance |
[Motor] 100 MΩ or more when 500 VDC megger is applied between the motor windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
[Motor] Sufficient to withstand 0.5 kVAC, at 50 or 60 Hz applied between the motor coils and casing for 1 min., under normal temperature and humidity. |
Insulation Class |
[Motor] Class B [266ºF (130ºC)] |
Ambient Temperature Range |
[Motor] 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) [Driver] 32 ~ 104ºF (0 ~ 40ºC) (non-freezing) |
Ambient Humidity |
85% or less (Non-condensing) |
Operating Atmosphere |
Not exposed to corrosive gases, dust, water or oil. |
Temperature Rise |
Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method when equipped with an aluminum heat sink of 4.53 x 4.53 in., 0.20 in., thick. (at rated current, at standstill, 2 phases energized) |
Shaft Runout |
0.002 in (0.05 mm) T.I.R. at top of output shaft |
Concentricity |
0.003 in. (0.075 mm) T.I.R. |
Perpendicularity |
0.003 in. (0.075 mm) T.I.R. |
Stop Position Accuracy |
±5 arc minutes (±0.084º) |
Radial Play |
0.001 inch (0.025 mm) max. of 1.12 lb. (5 N) |
Axial Play |
0.003 in (0.075 mm) max. of 2.2 lb. (10 N) |
Permissible Overhung Load |
0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb |
Permissible Thrust Load |
The permissible thrust load shall be no greater than the motor mass. |
