ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
The AS Series with built in controller utilizes closed loop control based on Oriental Motor's original Alpha Step technology. With the AS series there is no hunting or gain tuning required. The built-in rotor position detection sensor constantly monitors the motor movement. The AS Series with built in controller features as integrated controller which ensures a simple, efficient solution, utilizing RS-232 communication, allowing for up to 36 units to be daisy chained.
| Items |
 AS46MAP AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller |
AS46AAP AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller |
 AS46MAP-T3.6 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller |
AS46MAP-T7.2 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller |
AS46MAP-T10 AlphaStep Closed Loop Stepper Motor and Driver with Built-in Controller |
|||||
| Frame Size | 1.65 in | |||||||||
| Motor Length | 3.74 in. | 2.56 in. | 4.94 in. | 4.94 in. | 4.94 in. | |||||
| Speed-Torque Characteristics |
 Speed - Torque Characteristics |
Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
 Speed - Torque Characteristics |
|||||
| Holding Torque | 42 oz-in | 42 oz-in | 48 oz-in | 97.6 oz-in | 140.8 oz-in | |||||
| Type | Standard | |||||||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Taper Hobbed Gear | Taper Hobbed Gear | Taper Hobbed Gear | |||||
| Gear Ratio (X:1) | 3.6 :1 | 7.2 :1 | 10 :1 | |||||||
| Backlash | 2 arc min (0.034º) | 10 arc min (0.167º) | 10 arc min (0.167º) | |||||||
| Electromagnetic Brake | Equipped | Not Equipped | Equipped | Equipped | Equipped | |||||
| Static Friction Torque | 1.3125 lb-in | 1.5 lb-in | 3 lb-in | 4.4 lb-in | ||||||
| Continuous Duty | No | |||||||||
| Closed Loop System | Yes | |||||||||
| Built-in Controller | Yes | |||||||||
| Smooth Drive Function | No | |||||||||
| Shaft | Single | |||||||||
| Power Supply | Single-Phase 100-115 VAC | |||||||||
| Current | 3.3 A | |||||||||
| Permissible Speed Range (r/min) | 0 ~ 500 | 0 ~ 250 | 0 ~ 180 | |||||||
| Rotor Inertia | 0.45 oz-in² | 0.37 oz-in² | 0.45 oz-in² | 0.45 oz-in² | 0.45 oz-in² | |||||
| Lost Motion | ||||||||||
| RoHS Compliant | Yes | |||||||||
| Safety Standards | UL CSA (driver only) EN CE | |||||||||
| Permissible Overhung Load | 0 in. from Shaft End = 4.5 lb0.2 in. from Shaft End = 5.6 lb0.39 in. from Shaft End = 7.6 lb0.59 in. from Shaft End = 11.7 lb | 0 in. from Shaft End = 4.5 lb0.2 in. from Shaft End = 5.6 lb0.39 in. from Shaft End = 7.6 lb0.59 in. from Shaft End = 11.7 lb | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb | 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.1 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb | |||||
| Permissible Thrust Load | 3.3 lb | 3.3 lb | 3.3 lb | |||||||
| Permissible Thrust Load | The permissible thrust load shall be no greater than the motor mass. | The permissible thrust load shall be no greater than the motor mass. | ||||||||
| List Price | ||||||||||
|
|
||||||||||
