ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Return Policy |
This product cannot be cancelled or returned once the order has been processed. |
Motor Type |
Brushless DC Motor |
Motor Frame Size |
2.36 in. |
Output Power |
30 W (1/25 HP) |
Power Supply |
24 VDC |
Shaft/Gear Type |
Round Shaft (No Gearhead) |
Output Shaft Diameter |
8 mm |
Rated Torque |
1.06 lb-in |
Variable Speed Range (r/min) |
100 ~ 3000 |
Permissible Load Inertia |
9.80 oz-in² |
Permissible Overhung Load |
0.39 in. from Shaft End = 15.7 lb0.79 in. from Shaft End = 22 lb |
Permissible Thrust Load |
The permissible thrust load should not be greater than half the motor mass. |
Type |
Cable |
Power Input |
DC |
Position Control Mode |
No |
Torque Limit Control |
No |
Vertical Drive (Gravitational Operation) |
No |
Max. Extension Length (m) |
2 |
Components |
BLHM230KC-A (Motor) BLHD30K (Driver) |
RoHS Compliant |
Yes |
Safety Standards |
UL CSA CE |
CE Marking |
EMC Directives |
Insulation Class |
UL, CSA: Class A [105ºC (221ºF)] EN: Class E [120ºC (248ºF)] |
Insulation Resistance (Motor) |
100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity. |
Insulation Resistance (Driver) |
100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat radiation plate after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength (Motor) |
Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength (Driver) |
Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat radiation plate for 1 minute after continuous operation under normal ambient temperature and humidity. |
Ambient Temperature Range |
0ºC ~ +50ºC (+32ºF ~ +122ºF) (nonfreezing) |
Ambient Humidity |
85% max. (noncondensing) |
Operating Atmosphere |
No corrosive gases or dust. Cannot be used in radioactive area, magnetic field, vacuum or other special environment. |
Degree of Protection |
[Motor] IP65 (excluding the mounting surface and connectors) [Driver] IP00 |
Speed Control Method (Select one of the following) |
Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) |
Number of Speed Settings |
2 |
Multi-Speed Setting Method |
Switching between 2 speeds One speed is set by the internal potentiometer (1 pc), while another speed is set by an external potentiometer (optional PAVR-20KZ) or by external DC voltage (0~5 VDC). |
Instantaneous Stop |
Yes |
Multi-Axes Control |
Yes |
Alarm Output |
Yes |
Control System |
Any one of the following methods: 1. Set using internal potentiometer 2. By external potentiometer (20 kΩ 1/4 W) 3. By DC voltage control (0 ~ 5 VDC) 1 mA or more (input impedence 47 kΩ) |
