ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
| Lead Time1 | Up to 10 pcs as of 6:30am EST Estimated Ship: 10/17/2025 |
Product Line |
Oriental Motor® |
Frame Size |
2.36 in |
Motor Length |
4.53 in. |
Driver Voltage Input Power |
DC |
Speed-Torque Characteristics |
 Speed - Torque Characteristics |
Holding Torque |
255 oz-in |
Holding Torque at Motor Standstill |
156 oz-in |
Type |
Mechanical Absolute Encoder |
Shaft/Gear Type |
Taper Hobbed Gear |
Gear Ratio (X:1) |
3.6 :1 |
Backlash |
35 arc min (0.59°) |
Shaft |
Single |
Electromagnetic Brake |
Not Equipped |
Resolution (Resolution Setting: 1000 P/R) |
0.1 °/Pulse |
Permissible Speed Range (r/min) |
0 ~ 833 |
Rotor Inertia |
2 oz-in² |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
CE |
CE Marking |
EMC Directives |
California Proposition 65 |
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Class |
Class B [130ºC (266ºF)] |
Insulation Resistance |
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
0 ~ 40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
85% or less (Non-condensing) |
Operating Atmosphere |
Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
Degree of Protection |
IP66 (excluding the mounting surface and connector) |
Stop Position Accuracy |
±3 arc minutes (±0.05º) |
Shaft Runout |
0.05 mm (0.002 in.) T.I.R. |
Concentricity |
0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
0.075 mm (0.003 in.) T.I.R. |
Permissible Overhung Load |
0 in. from Shaft End = 27 lb0.2 in. from Shaft End = 30 lb0.39 in. from Shaft End = 33 lb0.59 in. from Shaft End = 37 lb0.79 in. from Shaft End = 40 lb |
Permissible Thrust Load |
8.9 lb |
