ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Return Policy |
This product cannot be cancelled or returned once the order has been processed. |
Basic Step Angle |
0.0288º |
Frame Size |
1.65 in |
Motor Length |
1.34 in. |
Speed-Torque Characteristics |
 |
Holding Torque |
352 oz-in |
Type |
Geared |
Shaft/Gear Type |
Planetary Gear |
Gear Ratio (X:1) |
25 :1 |
Backlash |
10 arc min (0.17º) |
Encoder |
Not Equipped |
Shaft |
Single |
Electromagnetic Brake |
Not Equipped |
Power Supply |
Single-Phase 100-120 VAC |
Current |
2.1 A |
Permissible Speed Range (r/min) |
0 ~ 120 |
Rotor Inertia |
0.16 oz-in² |
Radial Load |
0 in. from Shaft End = 24 lb0.2 in. from Shaft End = 28 lb0.39 in. from Shaft End = 33 lb0.59 in. from Shaft End = 41 lb |
Axial Load |
11.20 lb |
RoHS Compliant |
Yes |
Safety Standards |
UL CE |
CE Marking |
Low Voltage Directives EMC Directives |
Components |
RKSD503-AD [Driver] PKE543AC-PS25 [Motor] |
Degree of Protection |
[Motor] IP20 [Driver] IP10 |
Number of Positioning Data Sets |
64 |
Positioning Operation |
One-shot operation, Linked operation, Linked operation 2, Sequential mode, Direct mode |
Other Operation |
Continuous Operation, JOG Operation, Return-to-Home Operation, Test Operation |
Protocol |
Modbus Protocol (Modbus RTU mode) |
Electrical Characteristics |
EIA-485 compliance Twisted-pair wire (TIA/EIA-568B CAT5e or greater recommended) is used up to a total extension length of 50 m. |
Transmission/Reception Mode |
Half-duplex communication |
Baud Rate |
9600 bps/19200 bps/57600 bps/115200 bps |
Physical Layer |
Asynchronous mode (data: 8-bit, stop bit: 1-bit/2-bit, parity: none/odd/even) |
Connection Type |
Up to 31 units can be connected to one programmable controller (master equipment). |
