ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Items |
PKP223U09B2 1.10 in. (28 mm) PKP Series 2-Phase Unipolar Stepper Motor Web Price $63.00
|
PKP225U09A2 1.10 in. (28 mm) PKP Series 2-Phase Unipolar Stepper Motor Web Price $68.00
|
PKP225U09B2 1.10 in. (28 mm) PKP Series 2-Phase Unipolar Stepper Motor Web Price $70.00
|
PKP223U09A-SG7.2 1.10 in. (28 mm) PKP Series 2-Phase Spur Gear (Offset Shaft) Unipolar Stepper Motor (Gear Ratio: 7.2:1) Web Price $202.00
|
PKP223U09B-SG7.2 1.10 in. (28 mm) PKP Series 2-Phase Spur Gear (Offset Shaft) Unipolar Stepper Motor (Gear Ratio: 7.2:1) Web Price $205.00
|
|||||
Basic Step Angle | - 1.8º | |||||||||
Frame Size | - 1.1 in | |||||||||
Motor Length | - 1.87 in. | - 2.64 in. | - 2.64 in. | - 2.24 in. | - 2.24 in. | |||||
Motor Connection Type | - Connector | |||||||||
Speed-Torque Characteristics |
-
|
-
|
-
|
-
|
-
|
|||||
Holding Torque | - 10.6 oz-in | - 19.1 oz-in | - 19.1 oz-in | - 42 oz-in | - 42 oz-in | |||||
Current per Phase (A/phase) | - 0.95 | |||||||||
Voltage (VDC) | - 2.95 | - 4.4 | - 4.4 | - 2.66 | - 2.66 | |||||
Resistance (Ω/phase) | - 3.11 | - 4.6 | - 4.6 | - 2.8 | - 2.8 | |||||
Inductance (mH/phase) | - 1.44 | - 2.11 | - 2.11 | - 1 | - 1 | |||||
Shaft/Gear Type | - Round Shaft with Flat (No Gearhead) | - Round Shaft with Flat (No Gearhead) | - Round Shaft with Flat (No Gearhead) | - Spur Gear (Offset Shaft) | - Spur Gear (Offset Shaft) | |||||
Gear Ratio (X:1) | - | - | - | - 7.2 :1 | - 7.2 :1 | |||||
Output Shaft Diameter | - 5 mm | |||||||||
Backlash | - | - | - | - 90 arc min (1.5°) | - 90 arc min (1.5°) | |||||
Shaft | - Single | - Single | - Single | - Single | - Double | |||||
Power Input | - DC | |||||||||
Encoder Output | - | |||||||||
Output Type | - | |||||||||
Electromagnetic Brake | - Not Equipped | |||||||||
Connection Type | - Unipolar | |||||||||
Lead Wire | - 6 Leads: Unipolar, Bipolar (Series), Bipolar (Half-coil) | |||||||||
Lead Wires | - 6 | |||||||||
Rotor Inertia | - 0.049 oz-in² | - 0.098 oz-in² | - 0.098 oz-in² | - 0.05 oz-in² | - 0.05 oz-in² | |||||
RoHS Compliant | - These products do not contain substances that exceed the regulation values in the RoHS Directive. | |||||||||
Safety Standards | - | |||||||||
Radial Load | - 0 in. from Shaft End = 5.6 lb0.2 in. from Shaft End = 7.6 lb0.39 in. from Shaft End = 11.7 lb | |||||||||
Axial Load | - 1.12 lb | |||||||||
Permissible Overhung Load | - | |||||||||
Permissible Thrust Load | - | |||||||||
Permissible Thrust Load | - The permissible thrust load shall be no greater than the motor mass. | - The permissible thrust load shall be no greater than the motor mass. | - The permissible thrust load shall be no greater than the motor mass. | - | - | |||||
Static Friction Torque | - | |||||||||
|