ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
Items |
US206-001U2 AC Motor Speed Control System |
US206-002E2 AC Motor Speed Control System |
US206-401U2 / 2GN3SA AC Speed Control System |
US206-401U2 / 2GN3.6SA AC Speed Control System |
US206-401U2 / 2GN5SA AC Speed Control System |
|||||
Frame Size | - 2.36 in | |||||||||
Output Power | - 6 W (1/125 HP) | |||||||||
Power Supply | - Single-Phase 110/115 VAC | - Single-Phase 220/230 VAC | - Single-Phase 110/115 VAC | - Single-Phase 110/115 VAC | - Single-Phase 110/115 VAC | |||||
Frequency (Hz) | - 60 | - 60 50 | - 60 | - 60 | - 60 | |||||
Current | - 0.28 A | - 0.13 A | - 0.28 A | - 0.28 A | - 0.28 A | |||||
Shaft/Gear Type | - Round Shaft (No Gearhead) | - Round Shaft (No Gearhead) | - Parallel Shaft Gearhead | - Parallel Shaft Gearhead | - Parallel Shaft Gearhead | |||||
Gear Ratio (X:1) | - | - | - 3 :1 | - 3.6 :1 | - 5 :1 | |||||
Output Shaft Diameter | - 6 mm | - 6 mm | - 5/16 in. | - 5/16 in. | - 5/16 in. | |||||
Permissible Torque | - 0.44 lb-in | - 0.41 lb-in [50 Hz] 0.44 lb-in [60 Hz] | - 1.06 lb-in | - 1.32 lb-in | - 1.77 lb-in | |||||
Variable Speed Range (r/min) | - 90 ~ 1600 | - 90 ~ 1400 [50 Hz] 90 ~ 1600 [60 Hz] | - 30 ~ 533 | - 25 ~ 444 | - 18 ~ 320 | |||||
Permissible Load Inertia | - | - | - 3.06 oz-in² | - 4.41 oz-in² | - 8.50 oz-in² | |||||
Permissible Overhung Load | - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb | - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb | - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb | - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb | - 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb | |||||
Permissible Thrust Load | - | - | - 6.7 lb | - 6.7 lb | - 6.7 lb | |||||
Permissible Thrust Load | - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. | - Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. | - | - | - | |||||
Speed Control Method (Select one of the following) | - Panel mounted potentiometer | |||||||||
Number of Speed Settings | - 1 | |||||||||
Instantaneous Stop | - No | |||||||||
Multi-Axes Control | - No | |||||||||
Alarm Output | - No | |||||||||
Position Control Mode | - No | |||||||||
Torque Limit Control | - No | |||||||||
Vertical Drive (Gravitational Operation) | - No | |||||||||
Max. Extension Length (m) | - 4.75 | |||||||||
RoHS Compliant | - Yes | |||||||||
Safety Standards | - UL CSA CCC EN CE | |||||||||
Dimensions |
-
|
-
|
- | - | - | |||||
|