3 W (1/250 HP) World K Series Single-Phase AC Motors & Gear Motors

The World K Series AC motors & gear motors offer a wide selection with reliable performance, global agency approvals and conform to the RoHS Directive. These AC motors are available as a round shaft motor only or with a parallel shaft gearhead.

3 W (1/250 HP)
1.65 in. (42 mm) Frame Size
Rated Torque

Round Shaft = 1.42 oz-in (10 mN·m)
Parallel Shaft Gear = 0.21 ~ 8.8 lb-in (0.024 ~ 1 N·m)

Lead Wire Type

Unit of Measure

Items	0IK3A-BW3U 3 W (1/250 HP) World K Series Induction Round Shaft Motor (Lead Wire) Web Price $105.00	0IK3GN-BW3U / 0GN3KA 3 W (1/250 HP) World K Series Induction Parallel Shaft Gearhead Motor (3:1 Gear Ratio) (Lead Wire) Web Price $178.00	0IK3GN-BW3U / 0GN3.6KA 3 W (1/250 HP) World K Series Induction Parallel Shaft Gearhead Motor (3.6:1 Gear Ratio) (Lead Wire) Web Price $178.00	0IK3GN-BW3U / 0GN5KA 3 W (1/250 HP) World K Series Induction Parallel Shaft Gearhead Motor (5:1 Gear Ratio) (Lead Wire) Web Price $178.00	0IK3GN-BW3U / 0GN6KA 3 W (1/250 HP) World K Series Induction Parallel Shaft Gearhead Motor (6:1 Gear Ratio) (Lead Wire) Web Price $178.00
Frame Size	- 1.65 in
Output Power	- 3 W (1/250 HP)
Voltage (VAC)	- Single-Phase 110/115 VAC
Frequency (Hz)	- 60
Current	- 0.115 A [110 VAC] 0.118 A [115 VAC]
Shaft/Gear Type	- Round Shaft (No Gearhead)	- Parallel Shaft Gearhead	- Parallel Shaft Gearhead	- Parallel Shaft Gearhead	- Parallel Shaft Gearhead
Gear Ratio (X:1)	-	- 3 :1	- 3.6 :1	- 5 :1	- 6 :1
Output Shaft	- Metric	- Imperial	- Imperial	- Imperial	- Imperial
Output Shaft Diameter	- 5 mm	- 3/16 in.	- 3/16 in.	- 3/16 in.	- 3/16 in.
Type	- Lead Wire
Electromagnetic Brake	- Not Equipped
Rated Torque	- 0.089 lb-in	- 0.21 lb-in	- 0.25 lb-in	- 0.36 lb-in	- 0.43 lb-in
Rated Speed (rpm)	- 3000	- 1200	- 1000	- 720	- 600
Permissible Load Inertia	-	- 0.79 oz-in²	- 1.14 oz-in²	- 2.20 oz-in²	- 3.17 oz-in²
Permissible Overhung Load	- 0.39 in. from Shaft End = 9 lb	- 0.39 in. from Shaft End = 4.5 lb	- 0.39 in. from Shaft End = 4.5 lb	- 0.39 in. from Shaft End = 4.5 lb	- 0.39 in. from Shaft End = 4.5 lb
Permissible Thrust Load	-	- 3.3 lb	- 3.3 lb	- 3.3 lb	- 3.3 lb
Permissible Thrust Load	- Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass.	-	-	-	-
RoHS Compliant	- Yes
Safety Standards	- UL CSA CCC EN CE