Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
Ideal for bi-directional operation, KII Series Reversible motors offer higher strength gears that maximize motor performance and extend the rated life, with ease of use wiring and mounting, all at affordable prices.
  • Instantaneous Bi-Directional Operation
  • Metric Output Shaft
  • Low Noise
  • 30-minute rating (can be extended depending on operating conditions
Unit of Measure

Specifications

Lead Time1 - Contact you local saless office for more information

Product Line

 - Oriental Motor®

Motor Type

 - Reversible

Frame Size

 - 3.15 in

Output Power

 - 25 W (1/30 HP)

Voltage (VAC)

 - Single-Phase 110/115 VAC

Frequency (Hz)

 - 60

Current

 - 0.50 A [220 VAC] 0.51 A [230 VAC]

Type

 - Lead Wire

Electromagnetic Brake

 - Not Equipped

Shaft/Gear Type

 - Round Shaft (No Gearhead)

Output Shaft Diameter

 - 8 mm

Rated Torque

 - 1.313 lb-in  

Rated Speed (rpm)

 - 1610

Permissible Load Inertia

 - 1.7 oz-in²

Permissible Overhung Load

 - 0.39 in. from Output Shaft End = 20 lb0.79 in. from Output Shaft End = 31 lb

Permissible Thrust Load

 - Avoid axial load as much as possible. If axial load is unavoidable, keep it to half or less of the motor mass.

RoHS Compliant

 - These products do not contain substances that exceed the regulation values in the RoHS Directive.

Safety Standards

 - UL CE

CE Marking

 - Low Voltage Directives

Insulation Resistance

 - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity.

Dielectric Strength

 - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity.

Temperature Rise

 - Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with 135 mm x 135 mm x 5mm Aluminum heat sink.

Insulation Class

 - 130 (B)

Overheat Protection

 - Built-in thermal protector (automatic return type). Open: 266 ± 9ºF (130 ± 5ºC) Close: 185 ± 36ºF (85 ± 20ºC)

Ambient Temperature Range

 - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing)

Ambient Humidity

 - 85% or less (noncondensing)

Degree of Protection

 - IP20

Dimensions


 

Capacitor


 

Connection


 

System


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.