Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
The BLV Series R Type brushless DC motor (BLDC motor) speed control system offers the design of motor and driver significantly reduced in size and weight, yet high-power, and contributes to the battery driven automation.
  • 24 - 48 VDC
  • Battery-operated
  • Compact and Lightweight
  • Low speed operation from 1 r/min
  • Compatible with Modbus (RTU) and CANopen Communication
  • 1.64 ft. (0.5 m) Cable Included
*Driver Power Cable required (sold separately)

Unit of Measure

Specifications

Lead Time1 - {Contact your local sales office for more information.}

Motor Type

 - Brushless DC Motor

Motor Frame Size

 - 3.54 in.

Output Power

 - 200 W (1/4 HP)

Power Supply

 - 24 - 48 VDC

Rated Input Current

 - 5.3 A (48 V)∼10.5 A (24 V)

Maximum Input Current

 - 18 A

Shaft/Gear Type

 - Round Shaft (No Gearhead)

Output Shaft Diameter

 - 14 mm

Rated Torque

 - 5.625 lb-in

Electromagnetic Brake

 - Not Equipped

Cable Direction

 - Opposite Output Shaft Side

Cable Length (Included)

 - 1.64 ft. (0.5 m)

Variable Speed Range (r/min)

 - 1 ~ 4000

Resolution

 - 0.01º (36000 Pulses per rotation)  

Permissible Load Inertia

 - 186 oz-in²

Permissible Overhung Load

 - 0.39 in. from Shaft End (3000 r/min) = 33 lb0.79 in. from Shaft End (3000 r/min) = 38 lb

Permissible Thrust Load

 - 5.6 lb

Power Input

 - DC

Components

 - BLVD-KRD [Driver] BLMR5200K-A-B [Motor]

Safety Standards

 - UL CE

CE Marking

 - EMC Directives

Insulation Class

 - [Motor] UL / CSA Standards: 105 (A), EN Standards: 120 (E)

Insulation Resistance (Motor)

 - 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity.

Insulation Resistance (Driver)

 - 100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat sink after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Motor)

 - Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Driver)

 - Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat ink for 1 minute after continuous operation under normal ambient temperature and humidity.

Ambient Temperature Range

 - 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing)

Ambient Humidity

 - 85% max. (noncondensing)

Operating Atmosphere

 - No corrosive gases or dust. This product should not be exposed to oil. Cannot be used in radioactive area, magnetic field, vacuum or other special environment.

Degree of Protection

 - [Motor] IP40 [Driver] IP20

Communications

Communication Protocol

 - Modbus RTU Mode

Electrical Characteristics

 - EIA-485 Based. Use a shielded twisted pair cable and keep the total wiring distance including extension to 32.8 ft. (10 m) or less.

Transmission/Reception Mode

 - Select either 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, or 230400 bps (initial value)

Dimensions


 

 

 

Speed-Torque


 

Product Number


 

System


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.