| Lead Time1 | Contact your local sales office for product lead-times, available to ship dates and shipping methods. |
Product Line |
Oriental Motor® |
Motor Type |
Closed Loop |
Frame Size |
3.54 in |
Motor Length |
6.97 in. |
Driver Voltage Input Power |
DC |
Speed-Torque Characteristics |
 |
Holding Torque |
3952 oz-in |
Shaft/Gear Type |
Hollow Shaft Flat Gear |
Gear Ratio (X:1) |
20 :1 |
Shaft |
Single |
Electromagnetic Brake |
Equipped |
Cable Direction |
Right |
Resolution (Resolution Setting: 1000 P/R) |
0.018 °/Pulse |
Permissible Speed Range (r/min) |
0 ~ 100 |
Rotor Inertia |
6.7 oz-in² |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
UL CE |
CE Marking |
EMC Directives |
Insulation Class |
Class B [130ºC (266ºF)] |
Insulation Resistance |
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings Case - Electromagnetic brake windings |
Dielectric Strength |
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.0 kVAC 50 Hz or 60 Hz Case - Electromagnetic brake windings 1.0 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
0 ~ 50ºC (32 ~ 122ºF) (non-freezing) (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 3.94 x 3.94 in., 0.24 in. thick is installed.) |
Ambient Humidity |
85% or less (Non-condensing) |
Operating Atmosphere |
No corrosive gases, dust water or oil |
Degree of Protection |
IP65 (excluding the mounting surface and connector) |
Permissible Overhung Load |
0.39 in. from Shaft End = 292 lb0.79 in. from Shaft End = 249 lb |
Permissible Thrust Load |
112 lb |
- 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.
