ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)
The AR Series stepper motor adopts our AlphaStep technology closed loop control so the motor does not lose synchronism even when subjected to abrupt load fluctuation or acceleration. Requires AlphaStep AR Series Driver.
| Items |
 ARM98AK-FR10 3.54 in. (90 mm) Closed Loop Stepper Motor with Hollow Shaft Flat Gear Web Price Request Quote
|
ARM98AK-FR10L 3.54 in. (90 mm) Closed Loop Stepper Motor with Hollow Shaft Flat Gear Web Price Request Quote
|
ARM98AK-FR10R 3.54 in. (90 mm) Closed Loop Stepper Motor with Hollow Shaft Flat Gear Web Price Request Quote
|
ARM98AK-FR20 3.54 in. (90 mm) Closed Loop Stepper Motor with Hollow Shaft Flat Gear Web Price Request Quote
|
ARM98AK-FR20L 3.54 in. (90 mm) Closed Loop Stepper Motor with Hollow Shaft Flat Gear Web Price Request Quote
|
|||||
| Frame Size | 3.54 in | |||||||||
| Motor Length | 5.31 in. | |||||||||
| Driver Voltage Input Power | DC | |||||||||
| Speed-Torque Characteristics |
 |
|
|
 |
|
|||||
| Holding Torque | 1968 oz-in | 1968 oz-in | 1968 oz-in | 3952 oz-in | 3952 oz-in | |||||
| Shaft/Gear Type | Hollow Shaft Flat Gear | |||||||||
| Gear Ratio (X:1) | 10 :1 | 10 :1 | 10 :1 | 20 :1 | 20 :1 | |||||
| Backlash | - | |||||||||
| Lost Motion | - | |||||||||
| Shaft | Single | |||||||||
| Electromagnetic Brake | Not Equipped | |||||||||
| Cable Direction | Down | Left | Right | Down | Left | |||||
| Permissible Speed Range (r/min) | 0 ~ 200 | 0 ~ 200 | 0 ~ 200 | 0 ~ 100 | 0 ~ 100 | |||||
| Rotor Inertia | 6 oz-in² | |||||||||
| RoHS Compliant | These products do not contain substances that exceed the regulation values in the RoHS Directive. | |||||||||
| Safety Standards | UL CE | |||||||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 202 lb0.79 in. from Shaft End = 173 lb | 0.39 in. from Shaft End = 202 lb0.79 in. from Shaft End = 173 lb | 0.39 in. from Shaft End = 202 lb0.79 in. from Shaft End = 173 lb | 0.39 in. from Shaft End = 292 lb0.79 in. from Shaft End = 249 lb | 0.39 in. from Shaft End = 292 lb0.79 in. from Shaft End = 249 lb | |||||
| Permissible Thrust Load | 112 lb | |||||||||
| Permissible Thrust Load | - | |||||||||
|
|
||||||||||
