| Lead Time1 | N/A {Contact your local sales office for more information.} |
Fan Type |
N/A Axial Flow |
Frame Size |
N/A 7.09 in180 mm |
Thickness |
N/A 2.56 in.65 mm |
Power Supply |
N/A Single-Phase 100-120 VAC |
Frequency |
N/A 50 Hz60 Hz |
Current |
N/A 0.63 A |
Function |
N/A Low Speed Alarm - Electronic |
Connection Type |
N/A Connector |
Speed (r/min) |
N/A 3000 |
Max. Air Flow |
N/A 318 CFM 9.0 m3 |
Max. Static Pressure |
N/A 0.618 inH2O 154 Pa |
Noise Level |
N/A 55 dB (A) |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
N/A UL CE |
CE Marking |
N/A Low Voltage Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Dielectric Strength |
N/A No abnormality is observed even with an application of 1.5 kVAC at 50 Hz between the windings and the case for 1 minute after continuous operation, at normal ambient temperature and humidity. |
Temperature Rise |
N/A 54ºF (30ºC) or less measured by the thermometer method after the temperature of the case has stabilized after continuous operation under normal ambient temperature and humidity. |
Thermal Class |
N/A UL/CSA Standards: 105 (A), EN Standards: 120 € |
Overheat Protection |
N/A This type of fan is equipped with a built-in overheat prevention circuit. |
Ambient Temperature Range |
N/A -13ºF ~ 149ºF (-25ºC ~ 65ºC) |
Ambient Humidity |
N/A 85% or less (noncondensing) |
Alarm Type |
N/A Electronic |
Alarm Activation Speed |
N/A When the rotation speed has decreased below 70% of the set speed. |
Output Mode |
N/A PhotoMOS Relays Output |
Output Condition |
N/A Normal operation: Contact ON; Alarm output: Contact OFF |
Maximum Rating |
N/A
Maximum applied voltage: 30 VDC max. Maximum current: 30 mA max. ON Voltage: 0.1 Max. |
Delay Function |
N/A External delay circuit is required to prevent alarm detection when starting the fan. The delay time should be 10 sec. min. |
Circuit Connection |
N/A
 Circuit Connection |
|
|
|
|
|
|
