| Lead Time1 | N/A {Contact your local sales office for more information.} |
Fan Type |
N/A Centrifugal Fan / Blower |
Impeller Diameter |
N/A 4.72 in.120 mm |
Power Supply |
N/A 24 VDC |
Current (A) |
N/A 1.50 |
Function |
N/A Low Speed Alarm |
Speed (r/min) |
N/A 1900 |
Max. Air Flow |
N/A 106 CFM 3 m3/min |
Max. Static Pressure |
N/A 1.49 inH2O 372 Pa |
Noise Level |
N/A 58 dB (A) |
Fan Kit |
N/A Fan Only |
RoHS Compliant |
N/A Yes |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 10 MΩ or more when 500 VDC is applied between the windings and the frame under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 500 V at 50Hz applied between the windings and the frame for 1 minute under normal ambient temperature and humidity. |
Temperature Rise |
N/A 27ºF (15ºC) or less measured by the thermometer method after the temperature of the motor case has stabilized after continuous operation under normal ambient temperature and humidity. |
Insulation Class |
N/A Class E (248ºF [120ºC]) |
Overheat Protection |
N/A Built-in Overheat Protection Circuit |
Ambient Temperature Range |
N/A 14ºF ~ 140ºF (-10ºC ~ 60ºC) |
Ambient Humidity |
N/A 85% or less (noncondensing) |
Output Type |
N/A PhotoMOS relay output |
Alarm Activation Speed |
N/A 1300 ± 400 r/min |
Output Condition |
N/A
Normal operation: ON (closed) Alarm output: OFF (open) |
Maximum Rating |
N/A
Maximum applied voltage: 30 VDC max. Maximum current: 30 mA max. |
Delay Function |
N/A
Built-in starting delay time: 10 sec. max. (The alarm function starts monitoring within 10 seconds after the power is turned on.) |
Circuit Connection |
N/A
 |
|
|
|
|
|
|
|
|
