| Lead Time1 | N/A {Contact your local sales office for more information.} |
Motor Type |
N/A 2-Phase |
Step Angle |
N/A 0.09 ° |
Frame Size |
N/A 3.35 in85 mm |
Motor Length |
N/A 7.30 in.185 mm |
Type |
N/A Geared |
Holding Torque |
N/A 8416 oz-in59.4 N·m |
Current per Phase (A/phase) |
N/A 4.5 |
Voltage (VDC) |
N/A 1.9 |
Resistance (Ω/phase) |
N/A 0.42 |
Inductance (mH/phase) |
N/A 3.1 |
Shaft/Gear Type |
N/A Planetary Gear |
Gear Ratio (X:1) |
N/A 20 :1 |
Output Shaft |
N/A Metric |
Output Shaft Diameter |
N/A 20 mm |
Shaft |
N/A Double |
Motor Connection Type |
N/A Lead Wire |
Connection Type |
N/A Bipolar |
Lead Wires |
N/A 4 |
Rotor Inertia |
N/A 6 oz-in²1100x10-7 kg·m² |
Stop Position Accuracy |
N/A ±3 arc minutes (±0.05º) |
Radial Load |
N/A Center of shaft = 281.25 lbCenter of Shaft = 1250 N |
Axial Load |
N/A 360 lb1600 N |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Class |
N/A Class B [266ºF (130ºC)] |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise |
N/A Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated voltage, at standstill, 2 phases energized) |
Ambient Temperature Range |
N/A 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
N/A 85% or less (Non-condensing) |
|
|
|
|
|
|
|
|
|
|
