| Lead Time1 | N/A {Contact your local sales office for more information.} |
Motor Type |
N/A 2-Phase |
Basic Step Angle |
N/A 1.8º |
Step Angle |
N/A 0.05 ° |
Frame Size |
N/A 1.65 in42 mm |
Motor Length |
N/A 2.32 in.59 mm |
Motor Connection Type |
N/A Connector |
Holding Torque |
N/A 113 oz-in0.80 N·m |
Type |
N/A Geared |
Current per Phase (A/phase) |
N/A 0.67 [Bipolar (Series)] 0.95 [Unipolar] |
Voltage (VDC) |
N/A
2.95 [Bipolar (Series)] 2.09 [Unipolar] |
Resistance (Ω/phase) |
N/A
4.4 [Bipolar (Series)] 2.2 [Unipolar] |
Inductance (mH/phase) |
N/A
9.2 [Bipolar (Series)] 2.3 [Unipolar] |
Shaft/Gear Type |
N/A Spur Gear (Offset Shaft) |
Gear Ratio (X:1) |
N/A 36 :1 |
Backlash |
N/A 20 arc min (0.33º) |
Shaft |
N/A Double |
Encoder |
N/A Not Equipped |
Electromagnetic Brake |
N/A Not Equipped |
Connection Type |
N/A Bipolar (Series) Unipolar |
Lead Wires |
N/A 6 |
Rotor Inertia |
N/A 0.20 oz-in²36x10-7 kg·m² |
Shaft Runout |
N/A 0.05 mm (0.002 in.) T.I.R. |
Stop Position Accuracy |
N/A ±3 arc minutes (±0.05º) |
Radial Load |
N/A 0 in. from Shaft End = 2.2 lb0.2 in. from Shaft End = 3.3 lb0.39 in. from Shaft End = 4.5 lb0.59 in. from Shaft End = 6.7 lb0 mm from Shaft End = 10 N5 mm from Shaft End = 15 N10 mm from Shaft End = 20 N15 mm from Shaft End = 30 N |
Axial Load |
N/A 3.3 lb15 N |
Radial Play |
N/A 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play |
N/A 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Concentricity |
N/A 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
N/A 0.075 mm (0.003 in.) T.I.R. |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Class |
N/A Class B [266ºF (130ºC)] |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 0.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise |
N/A Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized) |
Ambient Temperature Range |
N/A 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
N/A 85% or less (Non-condensing) |
|
|
|
|
