| Lead Time1 | N/A {Contact your local sales office for more information.} |
Motor Type |
N/A 2-Phase |
Basic Step Angle |
N/A 1.8º |
Step Angle |
N/A 0.05 ° |
Frame Size |
N/A 2.36 in60 mm |
Motor Length |
N/A 3.09 in.78.50 mm |
Motor Connection Type |
N/A Connector |
Holding Torque |
N/A 560 oz-in4 N·m |
Type |
N/A Geared |
Current per Phase (A/phase) |
N/A 2 [Unipolar] |
Voltage (VDC) |
N/A 2.90 |
Resistance (Ω/phase) |
N/A 1.45 |
Inductance (mH/phase) |
N/A 1.80 |
Shaft/Gear Type |
N/A Spur Gear (Offset Shaft) |
Gear Ratio (X:1) |
N/A 36 :1 |
Backlash |
N/A 2 arc min (0.034º) |
Shaft |
N/A Double |
Encoder |
N/A Not Equipped |
Electromagnetic Brake |
N/A Not Equipped |
Connection Type |
N/A Bipolar (Series) Unipolar |
Lead Wires |
N/A 6 |
Rotor Inertia |
N/A 0.66 oz-in²120x10-7 kg·m² |
Shaft Runout |
N/A 0.05 mm (0.002 in.) T.I.R. |
Stop Position Accuracy |
N/A ±3 arc minutes (±0.05º) |
Radial Load |
N/A 0 in. from Shaft End = 18 lb0.2 in. from Shaft End = 22 lb0.39 in. from Shaft End = 27 lb0.59 in. from Shaft End = 31 lb0.79 in. from Shaft End = 36 lb0 mm from Shaft End = 80 N5 mm from Shaft End = 100 N10 mm from Shaft End = 120 N15 mm from Shaft End = 140 N20 mm from Shaft End = 160 N |
Axial Load |
N/A 6.7 lb30 N |
Radial Play |
N/A 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play |
N/A 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Concentricity |
N/A 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
N/A 0.075 mm (0.003 in.) T.I.R. |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Class |
N/A Class B [266ºF (130ºC)] |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Temperature Rise |
N/A Temperature rise of the windings is 144ºF (80ºC) or less measured by the change resistance method. (at rated current, at standstill, 2 phases energized) |
Ambient Temperature Range |
N/A 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
N/A 85% or less (Non-condensing) |
|
|
|
|
