Return Policy |
N/A This product cannot be cancelled or returned once the order has been processed. |
Motor Type |
N/A Closed Loop |
Frame Size |
N/A 3.54 in90 mm |
Motor Length |
N/A 5.31 in.135 mm |
Driver Voltage Input Power |
N/A DC |
Speed-Torque Characteristics |
N/A
 |
Holding Torque |
N/A 1968 oz-in14 N·m |
Shaft/Gear Type |
N/A Hollow Shaft Flat Gear |
Gear Ratio (X:1) |
N/A 10 :1 |
Shaft |
N/A Single |
Electromagnetic Brake |
N/A Not Equipped |
Cable Direction |
N/A Right |
Resolution (Resolution Setting: 1000 P/R) |
N/A 0.036 °/Pulse |
Permissible Speed Range (r/min) |
N/A 0 ~ 200 |
Rotor Inertia |
N/A 6 oz-in²1100x10-7 kg·m² |
Permissible Overhung Load |
N/A 0.39 in. from Shaft End = 202 lb0.79 in. from Shaft End = 173 lb10 mm from Shaft End = 900 N20 mm from Shaft End = 770 N |
Permissible Thrust Load |
N/A 112 lb500 N |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
N/A UL CE |
CE Marking |
N/A EMC Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Class |
N/A Class B [130ºC (266ºF)] |
Insulation Resistance |
N/A
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings Case - Electromagnetic brake windings |
Dielectric Strength |
N/A
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.0 kVAC 50 Hz or 60 Hz Case - Electromagnetic brake windings 1.0 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
N/A
0 ~ 50ºC (32 ~ 122ºF) (non-freezing) (when a heat sink of a capacity at least equivalent to an aluminum plate with a size of 3.94 x 3.94 in., 0.24 in. thick is installed.) |
Ambient Humidity |
N/A 85% or less (Non-condensing) |
Operating Atmosphere |
N/A No corrosive gases, dust water or oil |
Degree of Protection |
N/A IP65 (excluding the mounting surface and connector) |
|
|
|
|
|
|
