The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
| Lead Time1 | - {Contact your local sales office for more information.} |
Return Policy |
- This product cannot be cancelled or returned once the order has been processed. |
Frame Size |
- 3.54 in90 mm |
Motor Length |
- 5.67 in.144 mm |
Driver Voltage Input Power |
- AC |
Speed-Torque Characteristics |
-
 |
Holding Torque |
- 1416 oz-in10 N·m |
Holding Torque at Motor Standstill |
- 708 oz-in5 N·m |
Type |
- Mechanical Absolute Encoder |
Shaft/Gear Type |
- Planetary Gear, Non-Backlash |
Gear Ratio (X:1) |
- 5 :1 |
Lost Motion |
- 2 arcmin or less (±0.3 N·m) |
Shaft |
- Single |
Electromagnetic Brake |
- Not Equipped |
Connection Type |
- Connector |
Resolution (Resolution Setting: 1000 P/R) |
- 0.072 °/Pulse |
Permissible Speed Range (r/min) |
- 0 ~ 600 |
Rotor Inertia |
- 5.96 oz-in²1090x10-7 kg·m² |
Stop Position Accuracy |
- ±3 arc minutes (±0.05º) |
Shaft Runout |
- 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
- 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
- 0.075 mm (0.003 in.) T.I.R. |
Permissible Overhung Load |
- 0 in.from Shaft End = 14.6 lb0.2 in. from Shaft End = 15.4 lb0.39 in. from Shaft End = 16.1 lb0.59 in. from Shaft End = 16.9 lb0.79 in. from Shaft End = 24.8 lb0 mm from Shaft End = 370 N5 mm from Shaft End = 390 N10 mm from Shaft End = 410 N15 mm from Shaft End = 430 N20 mm from Shaft End = 460 N |
Permissible Thrust Load |
- 134 lb600 N |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
- UL CE |
California Proposition 65 |
-
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Class |
-
Class B [130ºC (266ºF)] [Recognized as 105 (A) by UL.] |
Insulation Resistance |
-
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
-
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
- 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
- 85% or less (Non-condensing) |
Degree of Protection |
- IP66 (excluding the mounting surface and the connector on the driver side of the connecting cable when connected) |
|
|
|
|
|
|
|
|
