| Lead Time1 | N/A Contact your local sales office for more information |
Return Policy |
N/A This product cannot be cancelled or returned once the order has been processed. |
Product Line |
N/A Oriental Motor® |
Motor Type |
N/A Reversible |
Frame Size |
N/A 3.54 in90 mm |
Output Power |
N/A 40 W (1/19 HP) |
Voltage (VAC) |
N/A Single-Phase 110/115 VAC |
Frequency (Hz) |
N/A 60 |
Current |
N/A 0.81 A |
Type |
N/A Terminal Box |
Electromagnetic Brake |
N/A Not Equipped |
Shaft/Gear Type |
N/A Round Shaft (No Gearhead) |
Output Shaft Diameter |
N/A 10 mm |
Rated Torque |
N/A 2.188 lb-in 0.25 N·m |
Rated Speed (rpm) |
N/A 1570 |
Permissible Load Inertia |
N/A 6 oz-in²1.1 x; 10-4 kg·m² |
Permissible Overhung Load |
N/A 0.39 in. from Output Shaft End = 31 lb0.79 in. from Output Shaft End = 45 lb10 mm from Output Shaft End = 140 N20 mm from Output Shaft End = 200 N |
Permissible Thrust Load |
N/A Avoid axial load as much as possible. If axial load is unavoidable, keep it to half or less of the motor mass. |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
N/A UL CE |
CE Marking |
N/A Low Voltage Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
Temperature Rise |
N/A Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with 165 mm x 165 mm x 5mm Aluminum heat sink. |
Insulation Class |
N/A 130 (B) |
Overheat Protection |
N/A Built-in thermal protector (automatic return type). Open: 266 ± 9ºF (130 ± 5ºC) Close: 185 ± 36ºF (85 ± 20ºC) |
Ambient Temperature Range |
N/A 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
N/A 85% or less (noncondensing) |
Degree of Protection |
N/A IP40 |
|
|
|
|
|
|
|
|
