Return Policy |
N/A This product cannot be cancelled or returned once the order has been processed. |
Product Line |
N/A Oriental Motor® |
Motor Type |
N/A Reversible |
Frame Size |
N/A 2.36 in60 mm |
Output Power |
N/A 6 W (1/125 HP) |
Voltage (VAC) |
N/A Single-Phase 110/115 VAC |
Frequency (Hz) |
N/A 60 |
Current |
N/A 0.211 A [110 VAC] 0.218 A [115 VAC] |
Electromagnetic Brake |
N/A Equipped |
Type |
N/A Lead Wire |
Shaft/Gear Type |
N/A Parallel Shaft Gearhead |
Gear Ratio (X:1) |
N/A 100 :1 |
Output Shaft Diameter |
N/A 3/8 in. |
Rated Torque |
N/A 27 lb-in 3.1 N·m |
Rated Speed (rpm) |
N/A 18 |
Permissible Load Inertia |
N/A 13700 oz-in²When performing instantaneous stop = 850 oz-in²2500 x 10-4 kg·m²When performing instantaneous stop = 155 x 10-4 kg·m² |
Permissible Overhung Load |
N/A 0.39 in. from Output Shaft End = 45 lb0.79 in. from Output Shaft End = 67 lb10 mm from Output Shaft End = 200 N20 mm from Output Shaft End = 300 N |
Permissible Thrust Load |
N/A 9 lb40 N |
Components |
N/A 2RK6GV-UAM [Motor] 2GV100A [Gearhead] |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
N/A UL CE |
CE Marking |
N/A Low Voltage Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
Temperature Rise |
N/A Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method after rated operation under normal ambient temperature and humidity with 115 mm x 115 mm x 5mm Aluminum heat sink. |
Overheat Protection |
N/A Impedance protection |
Ambient Temperature Range |
N/A 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
N/A 85% or less (noncondensing) |
Degree of Protection |
N/A IP20 |
Voltage (Brake) |
N/A Single-Phase 110/115 VAC |
Current (Brake) |
N/A 0.03 A |
Input |
N/A 3 W |
Static Friction Torque |
N/A 4.2 oz-in0.03 N·m |
|
|
|
|
|
|
|
|
