Product Line
|
-
Oriental Motor®
|
Motor Type
|
-
AC Motor
|
Frame Size
|
-
4.09 in104 mm
|
Output Power
|
-
200 W (1/4 HP)
|
Power Supply
|
-
Three-Phase 200/230 VAC
|
Frequency
|
-
50 Hz60 Hz
|
Rated Input Current
|
-
1.75 A
|
Maximum Input Current
|
-
2.70 A
|
Shaft/Gear Type
|
-
Right-Angle Solid Shaft Gearhead
|
Gear Ratio (X:1)
|
-
5 :1
|
Output Shaft Diameter
|
-
22 mm
|
Electromagnetic Brake
|
-
Not Equipped
|
Permissible Torque
|
-
40 lb-in [100 ~ 1500 r/min] 4.6 N·m [100 ~ 1500 r/min]
|
Variable Speed Range (r/min)
|
-
20 ~ 480
|
Permissible Load Inertia
|
-
270 oz-in²50 x 10-4 kg·m²
|
Permissible Overhung Load
|
-
0.39 in. from Shaft End = 200 lb0.79 in. from Shaft End = 220 lb10 mm from Shaft End = 900 N20 mm from Shaft End = 1000 N
|
Permissible Thrust Load
|
-
67 lb300 N
|
Max. Extension Length (m)
|
-
50
|
Components
|
-
BHM62T-G2 (Motor) FSP200-3 (Inverter) BH6G2-5RA (Gearhead)
|
RoHS Compliant
|
-
Yes
|
Safety Standards
|
-
UL CSA EN CE
|
CE Marking
|
-
Low Voltage Directives EMC Directives
|
Acceleration/Deceleration Time
|
-
0.1 ~ 25 seconds (at 1000 r/min)
|
Control System
|
-
Any one of the following methods: 1. By built in potentiometer (1 piece) 2. By external potentiometer (20 kΩ 1/4 W) 3. By DC voltage control (0 ~ 5 VDC)
|
Insulation Class
|
-
Class B (266ºF [130ºC])
|
Insulation Resistance (Motor)
|
-
100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity.
|
Insulation Resistance (Inverter)
|
-
100 MΩ or more when 500 VDC megger between the power supply input terminal and the Protective Earth terminal and between the power supply input terminal and the I/O terminal after continuous operation under normal ambient temperature and humidity.
|
Dielectric Strength
|
-
[Motor] Sufficient to withstand 1500 VAC at 50 Hz and 60 Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. [Driver] Sufficient to withstand 1.5 kV (3kV) at 50 Hz and 60 Hz applied between the power supply input terminal and the Protective Earth terminal (I/O terminal for 1 minute after continuous operation under normal ambient temperature and humidity.
|
Ambient Temperature Range
|
-
[Motor] 14ºF ~ 104ºF (-10ºC ~ 40ºC) 14ºF ~ 122ºF (-10ºC ~ 50ºC) for 100/200 VAC, nonfreezing [Driver] 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing
|
Ambient Humidity
|
-
85% maximum (noncondensing)
|
Degree of Protection
|
-
[Motor] IP54 [Inverter] IP10
|
