-Any one of the following methods: 1. By built in potentiometer (1 piece) 2. By external potentiometer (20 kΩ 1/4 W) 3. By DC voltage control (0 ~ 5 VDC)
Insulation Class
-Class E [248ºF (120ºC)]
Insulation Resistance (Motor)
-100 MΩ or more when 500 VDC megger is applied between the windings and the frame.
Insulation Resistance (Driver)
-100 M Ω or more when 500 VDC megger is applied between the power supply input terminal and the Protective Earth terminal, between the power supply input terminal and the I/O terminal after continuous operation under normal ambient temperature and hu
Dielectric Strength
-[Motor] Sufficient to withstand 1500 VAC at 50 Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity. [Driver] Sufficient to withstand 1.8 kV (3kV) at 50 Hz applied between the power supply input terminal and the Protective Earth terminal (I/O terminal for 1 minute after continuous operation under normal ambient temperature and humidity.
Ambient Temperature Range
-32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing
Ambient Humidity
-85% maximum (noncondensing)
Operating Atmosphere
-No corrosive gases or dust.
Degree of Protection
-[Motor] IP40 [Driver] IP10
Features
Speed Control Method (Select one of the following)
-Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W)
Number of Speed Settings
-2
Multi-Speed Setting Method
-2 speed settings One speed is set by the internal potentiometer, while another speed is set by an external potentiometer (optional PAVR-20KZ) or by external DC voltage (0~5 VDC).
