COMPANY HEADER
Request Information
Please contact technical support for the replacement option. This part number has been discontinued.
Unit of Measure

Return Policy

N/A This product cannot be cancelled or returned once the order has been processed.

Output Shaft Type

N/A Round Shaft

Resolution (P/R)

N/A 2000 (P/R)

Output Type

N/A Incremental

Output

N/A Line Driver

Output Signals

N/A

A phase, B phase, Z phase: 3 channel

Output Circuit

N/A
 

Max. Draw Current

N/A 20 mA

Output Voltage (High)

N/A 2.5 VDC min

Output Voltage (Low)

N/A 0.5 VDC max.

Response Frequency (kHz)

N/A 200 kHz max.

Power Supply

N/A 5 VDC ± 10%

Current Consumption

N/A 30 mA max.

Angular Accuracy

N/A ±0.36˚

Vibration

N/A

10~55 Hz Full amplitude 1.5 mm X, Y, Z; 2 hours for each direction

Shock

N/A 490 m/s2 11 ms X, Y, Z directions; 3 times each

Inertia

N/A 1.0×10−7 kg·m²0.005 oz-in²

Permissible Radial Load

N/A 2.25 lb10 N

Permissible Axial Load

N/A 1.12 lb5 N

Max Speed (rpm)

N/A 6000 r/min (Max. Response Frequency)

Mass

N/A 33 g1.16 oz

California Proposition 65

N/A CA WARNING
Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov
Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov
See "?" or copy/paste www.P65Warnings.ca.gov in your browser.

Ambient Humidity

N/A 85% or less (Non-condensing)

Altitude

N/A Up to 1000 m above sea level

Degree of Protection

N/A IP20

Operating Atmosphere

N/A No corrosive gases or dust.The product should not be exposed to water, oil or other liquids.

Insulation Resistance

N/A 100 MΩ or more when a 500 VDC megger is applied between the power supply terminal and the frame.

Dielectric Strength

N/A Sufficient to withstand 0.5 kVAC 50/60 Hz applied between the power supply terminal and the frame for 1 minute.