COMPANY HEADER
Request Information
The BLV Series R Type is the replacement Series. This part number is scheduled to be discontinued. Please contact technical support for the details.
Unit of Measure
Lead Time1 N/A This product is scheduled to be discontinued, please contact your local sales office for more information.

Return Policy

N/A This product cannot be cancelled or returned once the order has been processed.

Motor Type

N/A Brushless DC Motor

Motor Frame Size

N/A 4.33 in.110 mm

Output Power

N/A 400 W (1/2 HP)

Power Supply

N/A 48 VDC

Shaft/Gear Type

N/A Parallel Shaft Gearhead

Gear Ratio (X:1)

N/A 30 :1

Output Shaft Diameter

N/A 22 mm

Rated Torque

N/A 290 lb-in33.50 N·m

Electromagnetic Brake

N/A Not Equipped

Variable Speed Range (r/min)

N/A 3.3 ~ 133

Permissible Load Inertia

N/A 21000 oz-in²*When instantaneous stop or instantaneous bi-directional operation is performed = 9800 oz-in²3900 x 10-4 kg·m²*When instantaneous stop or instantaneous bi-directional operation is performed = 1800 x 10-4 kg·m²

Permissible Overhung Load

N/A 0.39 in. from Shaft End = 220 lb0.79 in. from Shaft End = 280 lb10 mm from Shaft End = 1000 N20 mm from Shaft End = 1250 N

Permissible Thrust Load

N/A 67 lb300 N

Type

N/A Cable

Speed Control Method (Select one of the following)

N/A Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W)

Number of Speed Settings

N/A 2 Standard / 8 with MEXE02 Softwre or OPX-2A Controller

Instantaneous Stop

N/A Yes

Multi-Axes Control

N/A Yes

Alarm Output

N/A Yes

Power Input

N/A DC

Max. Extension Length (m)

N/A 3.5

Communication Protocol

N/A Modbus Protocol (Modbus RTU mode)

Electrical Characteristics

N/A Complies with EIA-485
The maximum total length of communicatoin cable is 50 m when using twisted-pair wire (TIA/EIA-568B CAT5e or better recommended)

Transmission/Reception Mode

N/A Half duplex

Baud Rate

N/A 625000 bps

Physical Layer

N/A Start-stop synchronization (data: 8 bits, stop bit: 1 bit, parity: none)

Components

N/A BLVM640N-GFS [Motor] BLVD40NM [Driver] GFS6G30 [Gearhead]

RoHS Compliant

N/A Yes

Safety Standards

N/A CE

CE Marking

N/A EMC Directives

California Proposition 65

N/A CA WARNING
Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov
Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov
See "?" or copy/paste www.P65Warnings.ca.gov in your browser.

Insulation Class

N/A [Motor] EN: Class E [120ºC (248ºF)]

Insulation Resistance (Motor)

N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity.

Insulation Resistance (Driver)

N/A 100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat radiation plate after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Motor)

N/A Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Driver)

N/A Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat radiation plate for 1 minute after continuous operation under normal ambient temperature and humidity.

Ambient Temperature Range

N/A 0ºC ~ +40ºC (+32ºF ~ +104ºF) (nonfreezing)

Ambient Humidity

N/A 85% max. (noncondensing)

Operating Atmosphere

N/A No corrosive gases or dust. Cannot be used in radioactive area, magnetic field, vacuum or other special environment.

Degree of Protection

N/A [Motor] IP40 [Driver] IP20

Degree of Protection (Motor)

N/A IP40


 

 


 


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.