The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
- Requires αSTEP AZ Series Driver
*Connection Cables required (sold separately)
| Lead Time1 | Up to 5 pcs as of 6:30am EST Estimated Ship: 05/06/2025 |
Product Line |
Oriental Motor® |
Frame Size |
3.54 in |
Motor Length |
5.16 in. |
Driver Voltage Input Power |
AC |
Speed-Torque Characteristics |
 |
Holding Torque |
1968 oz-in |
Holding Torque at Motor Standstill |
1020 oz-in |
Type |
Absolute Mechanical Encoder |
Shaft/Gear Type |
Planetary Gear |
Gear Ratio (X:1) |
7.2 :1 |
Backlash |
7 arc min (0.12°) |
Shaft |
Single |
Electromagnetic Brake |
Not Equipped |
Connection Type |
Cable |
Resolution (Resolution Setting: 1000 P/R) |
0.05 °/Pulse |
Permissible Speed Range (r/min) |
0 ~ 416 |
Rotor Inertia |
6 oz-in² |
RoHS Compliant |
These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
UL CSA CE |
CE Marking |
Low Voltage Directives EMC Directives |
Insulation Class |
Class B [130ºC (266ºF)] [Recognized as 105 (A) by UL.] |
Insulation Resistance |
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
0 ~ 40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
85% or less (Non-condensing) |
Degree of Protection |
IP66 (excluding the mounting surface and connector) |
Stop Position Accuracy |
±3 arc minutes (±0.05º) |
Shaft Runout |
0.05 mm (0.002 in.) T.I.R. |
Concentricity |
0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
0.075 mm (0.003 in.) T.I.R. |
Permissible Overhung Load |
0 in. from Shaft End = 96 lb0.2 in. from Shaft End = 105 lb0.39 in. from Shaft End = 119 lb0.59 in. from Shaft End = 137 lb0.79 in. from Shaft End = 159 lb |
Permissible Axial Load |
134 lb |
- 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.
