The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
| Lead Time1 | N/A {Contact your local sales office for more information.} |
Frame Size |
N/A 3.54 in90 mm |
Motor Length |
N/A 9.02 in.229.1 mm |
Driver Voltage Input Power |
N/A AC |
Speed-Torque Characteristics |
N/A
 |
Holding Torque |
N/A 3037.6 oz-in21.45 N·m |
Holding Torque at Motor Standstill |
N/A 1416 oz-in10 N·m |
Holding Torque at Standstill Electromagnetic Brake |
N/A 1416 oz-in10 N·m |
Type |
N/A Mechanical Absolute Encoder |
Shaft/Gear Type |
N/A Planetary Gear |
Gear Ratio (X:1) |
N/A 10 :1 |
Backlash |
N/A 7 arc min (0.1167°) |
Shaft |
N/A Single |
Electromagnetic Brake |
N/A Equipped |
Connection Type |
N/A Cable |
Resolution (Resolution Setting: 1000 P/R) |
N/A 0.036 °/Pulse |
Permissible Speed Range (r/min) |
N/A 0 ~ 450 |
Stop Position Accuracy |
N/A ±3 arc minutes (±0.05º) |
Permissible Overhung Load |
N/A Static load, center of output shaft: 281.01 lbStatic load, center of output shaft: 1250 N |
Permissible Thrust Load |
N/A 359 lb1600 N |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
N/A UL CSA CE |
CE Marking |
N/A Low Voltage Directives EMC Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Class |
N/A
Class B [130ºC (266ºF)] [Recognized as 105 (A) by UL.] |
Insulation Resistance |
N/A
100 MΩ or more when 500 VDC megger is applied between the following places: Case - Motor and sensor windings |
Dielectric Strength |
N/A
Sufficient to withstand the following for 1 minute: Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz |
Ambient Temperature |
N/A 0 ~ 40ºC (32 ~ 104ºF) (non-freezing) |
Ambient Humidity |
N/A 85% or less (Non-condensing) |
Degree of Protection |
N/A
Motor: IP66 (excluding the mounting surface and connector) Gearhead: IP54 |
Brake Type |
N/A Active when the power is off |
Controller Power Supply |
N/A 24 VDC±5%, 0.3A |
Power Consumption |
N/A 6W |
Excitation Current |
N/A 0.25A |
|
|
|
|
|
|
|
|
|
|
