Induction motors are optimal for uni-directional continuous operation such as a conveyor system.
- The smallest frame size (4.09 inch [104 mm]) in the 1/3.73 HP (200 W) output class
- Hypoid gear-employed, right-angle gearheads
- Approved under typical international safety standards; bears the CE marking
- Combination type, with the motor and the gearhead coming pre-assembled
| Lead Time1 |
-
{Contact your local sales office for more information.} |
Product Line |
-
Oriental Motor® |
Motor Type |
-
Induction |
Frame Size |
-
4.09 104 |
Output Power |
-
200 W (1/4 HP) |
Voltage (VAC) |
-
Three-Phase 200/220/230 VAC |
Frequency (Hz) |
-
60 50 |
Current |
-
0.95 A [220/230 VAC] 1.1 A [200 VAC] |
Shaft/Gear Type |
-
Right-Angle Solid Shaft Gearhead |
Gear Ratio (X:1) |
-
6 |
Output Shaft Diameter |
-
22 mm |
Electromagnetic Brake |
-
Not Equipped |
Rated Torque |
-
48 lb-in [60 Hz] 57 lb-in [50 Hz] 5.5 N·m [60 Hz] 6.5 N·m [50 Hz] |
Rated Speed (rpm) |
-
250 [50 Hz] 300 [60 Hz] |
Permissible Load Inertia |
-
392 |
Permissible Load Inertia |
-
392 72 x 10-4 |
Permissible Overhung Load |
-
0.39 in. from Shaft End = 200 0.79 in. from Shaft End = 220 10 mm from Shaft End = 900 20 mm from Shaft End = 1000 |
Permissible Thrust Load |
-
67 300 |
RoHS Compliant |
-
Yes |
Safety Standards |
-
UL CSA CCC CE |
CE Marking |
-
Low Voltage Directives |
California Proposition 65 |
-
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from ex |
TISI Certification |
-
This product is subject to energy efficiency regulations in Thailand. |
Insulation Resistance |
-
100 MΩ or more when 500 VDC is applied between the windings and the case after rated motor operation under normal ambient temperature and humidity. |
Insulation Class |
-
Class B (266ºF [130ºC]) |
Dielectric Strength |
-
Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise |
-
Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead |
Overheat Protection |
-
Built-in thermal protector (Automatic return type). Operating temperature, open: 302ºF ± 9ºF (150ºC ± 5ºC) close: 204.8ºF ± 27ºF (96ºC ± 15ºC) |
Ambient Temperature Range |
-
14ºF ~ 104ºF (-10ºC ~ 40ºC) [Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC)] (non-freezing) |
Ambient Humidity |
-
85% or less (Non-condensing) |
Degree of Protection |
-
IP54 |
|
|
|
|
|
|
- 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.
