The BLE Series sets a new standard for brushless DC motors (BLDC motors) with up to 4,000 r/min in an energy saving, compact package.
  • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network converter)
  • Wide speed range
  • Excellent speed stability
  • Compact & high power
  • Energy saving
  • Space saving hollow shaft flat geared type
  • IP65 Protection
  • 8 Speed settings & torque limiting functions are available with the optional OPX-2A controller module or data setting software
*Connection cables required (sold separately)

Built-in Controller (Network Type)

Unit of Measure
Available to Ship1 Estimated Ship: 04/29/2025

Motor Type

 Brushless DC Motor

Motor Frame Size

 2.36 in.60 mm

Output Power

 30 W (1/25 HP)

Power Supply

 Single-Phase 100-120 VAC

Rated Input Current

 1.3 A

Shaft/Gear Type

 Hollow Shaft Flat Gearhead

Gear Ratio (X:1)

 10 :1

Output Shaft Diameter

 12 mm

Rated Torque

 7.5 lb-in0.85 N·m

Electromagnetic Brake

 Not Equipped

Control Module Included

 No

Variable Speed Range (r/min)

 10 ~ 400

Rotor Inertia

 0.48 oz-in2

Permissible Overhung Load

 0.39 in. from gearhead mounting surface = 101 lb0.79 in. from gearhead mounting surface = 83 lb10 mm from gearhead mounting surface = 450 N20 mm from gearhead mounting surface = 370 N

Permissible Thrust Load

 45 lb200 N

Position Control Mode

 No

Vertical Drive (Gravitational Operation)

 No

Max. Extension Length (m)

 20.40

Components

 , Brushless DC Motor Driver ($312.00)
, 30 W (1/25 HP) BLE Series Brushless DC Pinion Shaft Motor () ($204.00)
, GFS Gearhead Flat Hollow Shaft (10:1) ($223.00)

RoHS Compliant

 Yes

Safety Standards

 CE

CE Marking

 Low Voltage Directives EMC Directives

Thermal Class

 CSA standards: 105 (A), EN standards: 120 (E)

Insulation Resistance (Motor)

 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.

Insulation Resistance (Driver)

 100 MΩ or more when a 500 VDC megger is applied between the power supply terminal and the protective earth terminal and between the power supply terminal and the I/O signal terminal after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Motor)

 Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Driver)

 No abnormality is judged even with application of 1.5 VAC at 50 Hz between the power supply terminal and the protective earth terminal and with application of 1.5 kVAC at 50 Hz between the power supply terminal and the I/O terminal for 1 minute after continuous operation under normal ambient temperature and humidity.

Ambient Temperature Range

 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing

Ambient Humidity

 85% or less, noncondensing

Operating Atmosphere

 No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum or other special environment.

Degree of Protection

 [Driver] IP20 [Motor] IP65
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

ABOUT ORIENTAL MOTOR

PRODUCT INFO

SUPPORT

NEWS & EVENTS

WEB



©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved