The BLH Series combines a slim, high-power brushless DC motor with a 24 VDC board-type driver to meet your space-saving needs. Speed control range is 80 to 3000 r/min (with Digital driver).
  • Digital Driver type
  • Increased performance (higher torque and reduced noise)
  • Increased functionality with support software MEXE02

Motor, Driver Power Cable and I/O cable required (*sold separately)
Unit of Measure
Lead Time1 Estimated Ship: 03/11/2025

Motor Type

Brushless DC Motor

Motor Frame Size

1.65 in.42 mm

Output Power

15 W (1/50 HP)

Power Supply

24 VDC

Driver Type

Digital

Type

Connector

Shaft/Gear Type

Round Shaft with Flat (No Gearhead)

Output Shaft Diameter

6 mm

Degree of Protection (Motor)

IP40

Rated Torque

0.425 lb-in0.048 N·m

Variable Speed Range (r/min)

80 ~ 3000

Permissible Load Inertia

2.70 oz-in²0.5 x 10-4 kg·m²

Permissible Overhung Load

0.39 in. from Shaft End = 11.2 lb10 mm from Shaft End = 50 N

Permissible Thrust Load

The permissible thrust load should not be greater than half the motor mass.

Power Input

DC

Position Control Mode

No

Torque Limit Control

Yes

Vertical Drive (Gravitational Operation)

No

Max. Extension Length (m)

2

Components

, Brushless DC Motor Digital Driver (24 VDC) ($162.00)
, 15 W (1/50 HP) Brushless DC Motor Round Shaft with Flat (No Gearhead) (:1 Gear Ratio) ($157.00)

RoHS Compliant

Yes

Safety Standards

UL CSA CE

CE Marking

EMC Directives

Insulation Class

UL, CSA: Class A [105ºC (221ºF)] EN: Class E [120ºC (248ºF)]

Insulation Resistance (Motor)

100 MΩ or more when 500 VDC megger is applied between the windings and the frame after continuous operation under normal ambient temperature and humidity.

Insulation Resistance (Driver)

100 M Ω or more when 500 VDC megger is applied between the power supply terminal and heat radiation plate after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Motor)

Sufficient to withstand 0.5 kVAC at 50Hz applied between the windings and the frame for 1 minute after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Driver)

Sufficient to withstand 0.5 kVAC at 50Hz applied between the power supply terminal and the heat radiation plate for 1 minute after continuous operation under normal ambient temperature and humidity.

Ambient Temperature Range

0ºC ~ +50ºC (+32ºF ~ +122ºF) (nonfreezing)

Ambient Humidity

85% max. (noncondensing)

Operating Atmosphere

No corrosive gases or dust. Cannot be used in radioactive area, magnetic field, vacuum or other special environment.

Degree of Protection

[Motor] IP40 [Driver] IP00
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved