5-phase, fully digital microstepping driver, CVD Series
- Fully Closed-Loop Control Type
- Right-Angle Type
- Setting Range of Resolution: 100 to 125,000 P/R
- Lowest Vibration Driver Type
- *This driver does not come with a Motor Connection Connector, therefore customers have to prepare their own or purchase an appropriate connection cable to connect with our PKP motors. For the details, please contact our technical support.
Drivers
Drivers
Drivers
Unit of Measure
| Lead Time1 | |
Product Line |
- Oriental Motor® |
Driver Type |
- 5-Phase, Fully Closed-Loop Control Type |
Driver |
- Board Type with Mounting Plate (Right-Angle Type) |
Power Supply |
- 24 VDC |
Input Current |
- 0.6 ~ 3.0 A |
Output Current |
- 0.35～2.4 A/phase |
Excitation Mode |
- Microstep |
Lead Wires |
- 5 |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
- UL CE |
Electrical Characteristics |
-
EIA-485 Compliant Use a twisted pair wire and keep total extension length to 3 m. |
Communication Method |
- Half duplex, asynchronous communication (data: 8 bits, stop bit: 1 bit or 2 bits, parity: none, even or odd) |
Transmission Rate |
- Select either from 9600 bps, 19200 bps, 38400 bps, 57600 bps, 115200 bps, or 230400 bps |
Protocol |
- Modbus RTU Mode |
Number of Connectable Units |
- Up to 31 drivers can be connected to a single host controller |
|
|
|
|
|
|
|
|
- 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.
©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved
