The new DGII Series uses the highly efficient and energy saving AR Series as the motor of the hollow rotary actuator.
  • Large-Diameter, Hollow Output Table
  • Direct Coupling
  • Accurate Positioning
  • Shorter Positioning Time
  • Easy Home Operation
*Connection Cables required (sold separately)

Unit of Measure
Available to Ship1 Up to 5 pcs as of 6:30am EST Estimated Ship: 04/24/2025
This Item cannot be cancelled or returned.

Frame Size

2.36 in60 mm

Shaft

Double

Electromagnetic Brake

Not Equipped

Output Table Supporting Bearing

Deep-Groove Ball Bearing

Permissible Torque

7.9 lb-in0.9 N·m

Inertia

4324x10-7 kg·m²24 oz-in²

Permissible Speed Range (r/min)

200

Gear Ratio (X:1)

18 :1

Max. Holding Torque

3.9 lb-in0.45 N·m

Resolution

18000 P/R (0.02º)

Repetitive Positioning Accuracy (arc sec)

±15 arc sec (±0.004º)

Lost Motion

2 sec (0.033°)

Angular Transmission Accuracy

4 sec (0.067º)

Permissible Thrust Load

100 N22 lb

Permissible Moment Load

2 N·m17.7 lb-in

Runout of Output Table Surface

0.030 mm0 in.

Runout of Output Table Inner (Outer) Diameter

0.030 mm0 in.

Parallelism of Output Table

0.05 mm0 in.

Degree of Protection

[Actuator] IP20 [Driver] IP20

Insulation Class

130 (B)

Insulation Resistance (Actuator)

100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor and Sensor Windings

Dielectric Strength (Actuator)

No abnormality is found with the following application for 1 minute: Case - Motor and Sensor Windings 1.0 kV, 50 Hz or 60 Hz

Ambient Temperature (Actuator)

0 ~ +50ºC (+32 ~ 122ºF)(non-freezing)
0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) when home-sensor set (accessory is attached)

Ambient Humidity

85% max. (non-condensing)

Operating Atmosphere

Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.

Safety Standards

CE

RoHS Compliant

Yes

Dimensions

 

Power Supply

DC Input
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2025 - ORIENTAL MOTOR USA CORP. - All Rights Reserved