| Lead Time1 | N/A {Contact your local sales office for more information.} |
Product Line |
N/A Oriental Motor® |
Motor Type |
N/A Induction |
Frame Size |
N/A 3.15 in80 mm |
Output Power |
N/A 30 W (1/25 HP) |
Voltage (VAC) |
N/A Three-Phase 220/230/240 VAC |
Frequency (Hz) |
N/A 60 50 |
Current |
N/A
0.23 A [220 VAC, 50 Hz] 0.24 A [230 VAC, 50 Hz] 0.25 A [240 VAC, 50 Hz] 0.20 A [60 Hz] |
Type |
N/A Terminal Box |
Electromagnetic Brake |
N/A Not Equipped |
Shaft/Gear Type |
N/A Right-Angle Hollow Shaft (Stainless Steel) Gearhead |
Gear Ratio (X:1) |
N/A 100 :1 |
Output Shaft Diameter |
N/A 12 mm |
Rated Torque |
N/A 100 lb-in [50 Hz] 83 lb-in [60 Hz] 11.3 N·m [50 Hz] 9.4 N·m [60 Hz] |
Starting Torque |
N/A 119 lb-in [50 Hz] 79 lb-in [60 Hz] |
Starting Torque |
N/A 13.5 N·m [50 Hz] 9 N·m [60 Hz] |
Rated Speed (rpm) |
N/A 15 [50 Hz] 18 [60 Hz] |
Permissible Load Inertia |
N/A Instantaneous Stop = 18200 oz-in²55000 oz-in²Instantaneous Stop = 3333 x 10-4 kg·m²10000 x 10-4 kg·m² |
Permissible Overhung Load |
N/A 0.39 in. from Shaft End = 199 lb0.79 in. from Shaft End = 170 lb10 mm from Shaft End = 888 N20 mm from Shaft End = 758 N |
Permissible Thrust Load |
N/A 55 lb245 N |
Components |
N/A
4H100S, JH Series Right-Angle Shaft Gearhead (100:1) (Metric Shaft) ($404.00) 4IK30VKEST, 30 W (1/25 HP) KII / KIIS Series AC Motor & Gear Motors Induction Pinion Shaft Motor (Three-Phase 220/230/240 VAC) ($134.00) |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
N/A UL CCC CE |
CE Marking |
N/A Low Voltage Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity. |
Temperature Rise |
N/A A gearhead or equivalent heat sink [7.87 x 7.87 in. (200 x 200 mm), 0.20 in. (5 mm) thick, material aluminum] is connected to the motor and the winding temperature rise is measured at 144ºF (80ºC) or less using the resistance change method after |
Thermal Class |
N/A 130 (B) |
Ambient Temperature Range |
N/A 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
N/A 85% or less (noncondensing) |
Degree of Protection |
N/A IP66 |
|
|
|
|
|
|
