| Lead Time1 | N/A {Contact your local sales office for more information.} |
Frame Size |
N/A 2.36 in60 mm |
Motor Length |
N/A 3.43 in.87 mm |
Basic Step Angle |
N/A 0.36º |
Step Angle |
N/A 0.36 ° |
Holding Torque |
N/A 320 oz-in2.3 N·m |
Current per Phase |
N/A 2.4 A/phase |
Type |
N/A High-Resolution |
Shaft/Gear Type |
N/A Round Shaft with Flat (No Gearhead) |
Gear Type |
N/A No Gearhead |
Motor Connection Type |
N/A Connector |
Shaft |
N/A Single |
Output Shaft |
N/A Metric |
Output Shaft Diameter |
N/A 10 mm |
Connection Type |
N/A New Pentagon (Bipolar) |
Lead Wires |
N/A 5 |
Rotor Inertia |
N/A 5.3 oz-in²970x10-7 kg·m² |
Shaft Runout |
N/A 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
N/A 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
N/A 0.075 mm (0.003 in.) T.I.R. |
Radial Play |
N/A 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play |
N/A 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Radial Load |
N/A 0 in. from Shaft End = 20 lb0.2 in. from Shaft End = 22 lb0.39 in. from Shaft End = 29 lb0.59 in. from Shaft End = 40 lb0.79 in. from Shaft End = 60 lb0 mm. from Shaft End = 90 N5 mm from Shaft End = 100 N10 mm from Shaft End = 130 N15 mm from Shaft End = 180 N20 mm from Shaft End = 270 N |
Axial Load |
N/A 4.5 lb20 N |
RoHS Compliant |
N/A These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
N/A CE |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
N/A No abnormalities are observed, even when applying voltage between the windings and the case for 1 minute under normal ambient temperature and humidity with the following conditions. 1 kVAC 50/60 Hz |
Temperature Rise |
N/A Winding temperature rise 144ºF (80ºC) max. |
Ambient Temperature Range |
N/A 14 ~ 122ºF (-10 ~ 50ºC) (non-freezing) |
Ambient Humidity |
N/A 85% or less (Non-condensing) |
|
|
|
|
|
|
