COMPANY HEADER
Request Information
The EH Series is a electric gripper based on a rack-and-pinion mechanism equipped with an AZ Series motor. Its delicate grip, like that of a human hand, assists in automation and labor-saving.
  • Requires AZ Series DC Input Driver
  • Connection Cables sold separately

Compatible Motors

Compatible Motors

End Effectors

Compatible Motors

Lead Time1 N/A {Contact your local sales office for more information.}

Actuator Frame Size

N/A 46 mm

Finger Type

N/A 3-Finger Type

Cover

N/A Equipped

Input Power

N/A DC

Maximum Grip Force

N/A 50 N

Gripping Diameter (Outside)

N/A ⌀2 ~ ⌀24 mm

Gripping Diameter (Inside)

N/A ⌀14 ~ ⌀36 mm

Maximum Speed

N/A 1200 r/min

Push Speed

N/A 12 r/min

Permissible Axial Load

N/A 15 N

Permissible Radial Load

N/A 23 N

California Proposition 65

N/A CA WARNING
Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov
Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov
Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov
See "?" or copy/paste www.P65Warnings.ca.gov in your browser.

Insulation Class

N/A Class B [130ºC (266ºF)]

Insulation Resistance

N/A 100 MΩ or more when 500 VDC megger is applied between the following places:
Case - Motor and sensor windings

Dielectric Strength

N/A Sufficient to withstand the following for 1 minute:
Case - Motor and sensor windings 0.5 kVAC 50 Hz or 60 Hz

Ambient Temperature

N/A 0 ~ 40ºC (32 ~ 104ºF) (non-freezing)

Ambient Humidity

N/A 85% or less (Non-condensing)

Operating Atmosphere

N/A Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.


 


Push Force

Travel Amount


 

 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.