The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Mechanical Absolute Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.
| Lead Time1 | - {Contact your local sales office for more information.} |
Return Policy |
- This product cannot be cancelled or returned once the order has been processed. |
Frame Size |
- 2.36 in60 mm |
Motor Length |
- 6.46 in.164 mm |
Driver Voltage Input Power |
- AC |
Speed-Torque Characteristics |
-
 |
Holding Torque |
- 496 oz-in3.5 N·m |
Holding Torque at Motor Standstill |
- 425 oz-in3 N·m |
Holding Torque at Standstill Electromagnetic Brake |
- 425 oz-in3 N·m |
Type |
- Mechanical Absolute Encoder |
Shaft/Gear Type |
- Planetary Gear, Non-Backlash |
Gear Ratio (X:1) |
- 5 :1 |
Lost Motion |
- 2 arcmin or less (±0.105 N·m) |
Shaft |
- Single |
Electromagnetic Brake |
- Equipped |
Connection Type |
- Connector |
Resolution (Resolution Setting: 1000 P/R) |
- 0.072 °/Pulse |
Permissible Speed Range (r/min) |
- 0 ~ 600 |
Rotor Inertia |
- 2.90 oz-in²530×10-7 kg·m² |
Stop Position Accuracy |
- ±3 arc minutes (±0.05º) |
Shaft Runout |
- 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
- 0.075 mm (0.003 in.) T.I.R. |
Permissible Overhung Load |
-
0 in. from Shaft End = 54 lb 0.2 in. from Shaft End = 58.5 lb 0.39 in. from Shaft End = 62.9 lb 0.59 in. from Shaft End = 67.4 lb 0.8 in. from Shaft End = 74.2 lb0 mm from Shaft End = 240 N 5 mm from Shaft End = 260 N 10 mm from Shaft End = 280 N 15 mm from Shaft End = 300 N 20 mm from Shaft End = 330 N |
Permissible Thrust Load |
- 45 lb200 N |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Perpendicularity |
- 0.075 mm (0.003 in.) T.I.R. |
Safety Standards |
- UL CE |
CE Marking |
- Low Voltage Directives EMC Directives |
California Proposition 65 |
-
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
- 100 MΩ or more when 500 VDC megger is applied between the following places: Between case and electromagnetic brake windings |
Dielectric Strength |
- Sufficient to withstand the specified voltage applied between the following places for 1 minute: AC power input type: Between case and electromagnetic brake windings: 1.5 kVAC 50/60 Hz |
Ambient Temperature |
- 0 to +40 °C [+32 to +104 °F] (non-freezing) *Based on measurement conditions of Oriental Motor |
Ambient Humidity |
- 85% or less (Non-condensing) |
Operating Atmosphere |
- No corrosive gas or dust. No exposure to oil. |
Degree of Protection |
- IP66 when connecting the connection cable (excluding the mounting surface and connector on the driver side of the connection cable) *Do not install the product underwater or under high water pressure. |
Brake Type |
- Active when the power is off |
Controller Power Supply |
- 24 VDC±5% |
Excitation Current |
- 0.25A |
|
|
|
|
|
|
|
|
