αSTEP

The αSTEP AZ Series stepper motor offers closed loop control, substantially reduces heat generation from the motor and by incorporating the newly developed Absolute Mechanical Encoder, absolute-type positioning is available, without battery back up or external sensors to buy.

  • Round Shaft with Flat
  • Requires αSTEP AZ Series Driver

*Connection Cables required (sold separately)

Compatible Motors

Compatible Motors

Unit of Measure
Lead Time1 Up to 10 pcs as of 6:30am EST Estimated Ship: 12/01/2024

Product Line

Oriental Motor®

Frame Size

2.36 in60 mm

Motor Length

3.84 in.97.5 mm

Driver Voltage Input Power

DC

Speed-Torque Characteristics


Speed - Torque Characteristics

Holding Torque

280 oz-in2 N·m

Holding Torque at Motor Standstill

142 oz-in1 N·m

Type

Absolute Mechanical Encoder

Shaft/Gear Type

Round Shaft with Flat (No Gearhead)

Shaft

Single

Electromagnetic Brake

Not Equipped

Connection Type

Cable

Resolution (Resolution Setting: 1000 P/R)

0.36 °/Pulse

Rotor Inertia

4 oz-in²740x10-7 kg·m²

RoHS Compliant

These products do not contain substances that exceed the regulation values in the RoHS Directive.

Safety Standards

CE

CE Marking

EMC Directives

Insulation Class

Class B [130ºC (266ºF)]

Insulation Resistance

100 MΩ or more when 500 VDC megger is applied between the following places:
Case - Motor and sensor windings

Dielectric Strength

Sufficient to withstand the following for 1 minute:
Case - Motor and sensor windings 1.5 kVAC 50 Hz or 60 Hz

Ambient Temperature

0 ~ 40ºC (32 ~ 104ºF) (non-freezing)

Ambient Humidity

85% or less (Non-Condensing)

Operating Atmosphere

Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.

Degree of Protection

IP66 (excluding the mounting surface and connector)

Stop Position Accuracy

±3 arc minutes (±0.05º)

Shaft Runout

0.05 mm (0.002 in.) T.I.R.

Concentricity

0.075 mm (0.003 in.) T.I.R.

Perpendicularity

0.075 mm (0.003 in.) T.I.R.

Permissible Overhung Load

0 in. from Shaft End = 20 lb0.2 in. from Shaft End = 22 lb0.39 in. from Shaft End = 29 lb0.59 in. from Shaft End = 40 lb0.79 in. from Shaft End = 60 lb0 mm from Shaft End = 90 N5 mm from Shaft End = 100 N10 mm from Shaft End = 130 N15 mm from Shaft End = 180 N20 mm from Shaft End = 270 N

Permissible Axial Load

6.7 lb30 N
  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.

 

©2024 - ORIENTAL MOTOR USA CORP. - All Rights Reserved