Return Policy |
N/A This product cannot be cancelled or returned once the order has been processed. |
Product Line |
N/A VEXTA® |
Motor Type |
N/A 5-Phase |
Frame Size |
N/A 1.65 in42 mm |
Speed-Torque Characteristics |
N/A
 Speed - Torque Characteristics |
Holding Torque |
N/A 25 oz-in0.18 N·m |
Type |
N/A All-in-One |
Shaft/Gear Type |
N/A Round Shaft (No Gearhead) |
Feedback Device (Motor) |
N/A Not Equipped |
Power Supply |
N/A 24 VDC |
Current |
N/A 0.75 |
Resolution |
N/A 0.72º |
Rotor Inertia |
N/A 0.3 oz-in²54x10-7 kg·m² |
RoHS Compliant |
N/A Yes |
CE Marking |
N/A EMC Directive |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 100MΩ min. when a 500 VDC megger is applied as follows under normal ambient temperature and humidity: FG terminal and motor case - between power input terminals |
Insulation Class |
N/A 130 (B) |
Dielectric Strength |
N/A No abnormality is found in the following application for 1 minute under normal ambient temperature and humidity: FG terminal and motor case - between power input terminals 500 VAC 50 Hz or 60 Hz |
Ambient Temperature Range |
N/A 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing |
Ambient Humidity |
N/A 85% max. (noncondensing) |
Operating Atmosphere |
N/A Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
Degree of Protection |
N/A IP20 |
Temperature Rise |
N/A Temperature rise of the windings are 144ºF (80ºC) max. (measured by the resistance change method) at the rated current, at standstill, and 5-phases energized. |
Stop Position Accuracy |
N/A ±5 arc minutes (±0.084º) |
Shaft Runout |
N/A 0.002 in. (0.05mm) T.I.R. |
Radial Play |
N/A 0.001 in. (0.025 mm) maximum of 5 N (1.12 lb.)) |
Axial Play |
N/A 0.003 in. (0.075 mm) maximum of 10 N (2.2 lb.)) |
Concentricity |
N/A 0.003 in. (0.075 mm) T.I.R. |
Perpendicularity |
N/A 0.003 in. (0.075 mm) T.I.R. |
Radial Load |
N/A 0 in. from Shaft End = 4.5 lb0.2 in. from Shaft End = 5.6 lb0.39 in. from Shaft End = 7.6 lb0.59 in. from Shaft End = 11.7 lb0 mm from Shaft End = 20 N5 mm from Shaft End = 25 N10 mm from Shaft End = 34 N15 mm from Shaft End = 52 N |
Axial Load |
N/A 2.2 lb10 N |
Number of Positioning Data Sets |
N/A 64 |
Operation Functions |
N/A Positioning Operation, return-to-home operation, continuous operation, JOG operation, test operation |
Protocol |
N/A Modbus Protocol (Modbus RTU mode) |
Electrical Characteristics |
N/A
EIA-485 compliance Twisted-pair wire (TIA/EIA-568B CAT5e or greater recommended) is used up to a total extension length of 50 m. |
Transmission/Reception Mode |
N/A Half-duplex communication |
Baud Rate |
N/A 9600 bps/19200 bps/57600 bps/115200 bps |
Physical Layer |
N/A Start-stop synchronization mode (data length: 8-bit, stop bit: 1-bit/2-bit, parity: none/odd/even) |
Connection Type |
N/A Up to 31 axes can be connected to one programmable controller (master controller) |
