Return Policy |
N/A This product cannot be cancelled or returned once the order has been processed. |
Product Line |
N/A VEXTA® |
Motor Type |
N/A 2-Phase Microstep |
Frame Size |
N/A 2.36 in60 mm |
Motor Length |
N/A 3.11 in.79 mm |
Speed-Torque Characteristics |
N/A
 Speed - Torque Characteristics |
Holding Torque |
N/A 141 oz-in1 N·m |
Type |
N/A Geared |
Shaft/Gear Type |
N/A Spur Gear (Offset Shaft) |
Gear Ratio (X:1) |
N/A 3.6 :1 |
Encoder |
N/A Equipped |
Power Supply |
N/A 24 VDC |
Current |
N/A 2.9 A |
Shaft |
N/A Single |
Basic Step Angle |
N/A 0.5º |
Permissible Speed Range (r/min) |
N/A 0 ~ 600 |
Rotor Inertia |
N/A 0.66 oz-in²120x10-7 kg·m² |
RoHS Compliant |
N/A Yes |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Components |
N/A PK264A2AR25S3.6 [Motor] CMD2120P [Driver] |
Insulation Resistance |
N/A [Motor] 100 MΩ or more when 500 VDC megger is applied between the windings and the case under normal ambient temperature and humidity. |
Dielectric Strength |
N/A [Motor] Sufficient to withstand 1.0 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute under normal ambient temperature and humidity. |
Insulation Class |
N/A [Motor] Class B [266ºF (130ºC)] |
Ambient Temperature Range |
N/A
[Motor] 14~122ºF (-10~50ºC) (non-freezing) [Driver] 32~104ºF (0~40ºC) (non-freezing) |
Ambient Humidity |
N/A 85% or less (Non-condensing) |
Operating Atmosphere |
N/A No corrosive gases, dust, water or oil |
Temperature Rise |
N/A [Motor] Temperature rise of windings are 144ºF (80ºC) or less measured by the resistance change method (at rated voltage, at standstill, two phases energized) |
Shaft Runout |
N/A 0.05 mm (0.002 in.) T.I.R. |
Concentricity |
N/A 0.075 mm (0.003 in.) T.I.R. |
Perpendicularity |
N/A 0.075 mm (0.003 in.) T.I.R. |
Stop Position Accuracy |
N/A ±5 arc minutes (±0.084º) |
Radial Play |
N/A 0.025 mm (0.001 in.) maximum of 5 N (1.12 lb.) |
Axial Play |
N/A 0.075 mm (0.003 in.) maximum of 10 N (2.2 lb.) |
Radial Load |
N/A 0 in. from Shaft End = 6.7 lb0.2 in. from Shaft End = 9 lb0.39 in. from Shaft End = 11.2 lb0.59 in. from Shaft End = 13.5 lb0.79 in. from Shaft End = 15.7 lb0 mm from Shaft End = 30 N5 mm from Shaft End = 40 N10 mm from Shaft End = 50 N15 mm from Shaft End = 60 N20 mm from Shaft End = 70 N |
Axial Load |
N/A 6.7 lb30 N |
Encoder Type |
N/A Incremental |
Encoder Resolution (P/R) |
N/A 200 |
Output |
N/A 3-Channel A, B, I |
Input Current (mA) |
N/A 27 (Typ.) |
Input Voltage (V) |
N/A 5 ±10% |
Output Type |
N/A TTL |
Output Voltage (Low) |
N/A 0.5 VDC, 8 mA |
Output Voltage (High) |
N/A 2.0 VDC, -8 mA |
Response Frequency (kHz) |
N/A 300 (Max.) |
