| Lead Time1 | N/A {Contact your local sales office for more information.} |
Product Line |
N/A Oriental Motor® |
Motor Type |
N/A Induction |
Frame Size |
N/A 3.54 in90 mm |
Output Power |
N/A 40 W (1/19 HP) |
Voltage (VAC) |
N/A Three-Phase 200/220/230 VAC |
Frequency (Hz) |
N/A 60 50 |
Current |
N/A 0.30 A [200/220 VAC, 60 Hz] 0.31 A [230 VAC, 60 Hz] 0.32 A [200 VAC, 50 Hz] |
Shaft/Gear Type |
N/A Round Shaft (No Gearhead) |
Output Shaft |
N/A Metric |
Output Shaft Diameter |
N/A 10 mm |
Type |
N/A Lead Wire |
Electromagnetic Brake |
N/A Not Equipped |
Rated Torque |
N/A 2.25 lb-in [60 Hz] 2.63 lb-in [50 Hz] 0.26 N·m [60 Hz] 0.3 N·m [50 Hz] |
Rated Speed (rpm) |
N/A 1300 [200 VAC, 50 Hz] 1600 [60 Hz] |
Permissible Overhung Load |
N/A 0.39 in. from Shaft End = 31 lb0.79 in. from Shaft End = 45 lb10 mm from Shaft End = 140 N20 mm from Shaft End = 200 N |
Permissible Thrust Load |
N/A Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. |
RoHS Compliant |
N/A Yes |
Safety Standards |
N/A UL CSA CCC EN CE |
CE Marking |
N/A Low Voltage Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise |
N/A Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to an aluminum heat radiation plate [6.5 x 6.5 in. (165 x 165 mm), Thickness: 0.2 in. (5 mm)]. |
Insulation Class |
N/A Class B (266ºF [130ºC]) |
Overheat Protection |
N/A Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
Ambient Temperature Range |
N/A Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
N/A 85% maximum (noncondensing) |
Degree of Protection |
N/A IP20 |
|
|
|
|
|
|
