| Lead Time1 | N/A {Contact your local sales office for more information.} |
Product Line |
N/A Oriental Motor® |
Motor Type |
N/A Induction |
Frame Size |
N/A 3.54 in90 mm |
Output Power |
N/A 90 W (1/8 HP) |
Voltage (VAC) |
N/A Three-Phase 200/220/230 VAC |
Frequency (Hz) |
N/A 60 50 |
Current |
N/A 0.59 A [200 VAC, 60 Hz] 0.60 A [220 VAC, 60 Hz] 0.61 A [230 VAC, 60 Hz] 0.64 A [200 VAC, 50 Hz] |
Shaft/Gear Type |
N/A Parallel Shaft Gearhead |
Gear Ratio (X:1) |
N/A 7.5 :1 |
Output Shaft |
N/A Imperial |
Output Shaft Diameter |
N/A 5/8 in. |
Type |
N/A Lead Wire |
Electromagnetic Brake |
N/A Not Equipped |
Rated Torque |
N/A 30 lb-in [60 Hz] 36 lb-in [50 Hz] 3.5 N·m [60 Hz] 4.1 N·m [50 Hz] 3.5 [60 Hz] N·m4.1 [50 Hz] N·m30 [60 Hz] lb-in36 [50 Hz] lb-in |
Rated Speed (rpm) |
N/A 200 [200 VAC, 50 Hz] 240 [60 Hz] |
Permissible Load Inertia |
N/A 337.50 oz-in²61.875 x 10-4 kg·m² |
Permissible Overhung Load |
N/A 0.39 in. from Shaft End = 90 lb0.79 in. from Shaft End = 112 lb10 mm from Shaft End = 400 N20 mm from Shaft End = 500 N |
Permissible Thrust Load |
N/A 33 lb150 N |
RoHS Compliant |
N/A Yes |
Components |
N/A
5GE7.5SA, GE Gearhead Parallel Shaft (7.5:1) ($166.00) 5IK90GE-SW2, 90 W (1/8 HP) World K Series AC Motors Induction Pinion Shaft Motor (Three-Phase 200/220/230 VAC) ($187.00) |
Safety Standards |
N/A UL CSA CCC EN CE |
CE Marking |
N/A Low Voltage Directives |
California Proposition 65 |
N/A
⚠ CA WARNING Cancer risk from exposure to Nickel. See www.P65Warnings.ca.gov Risk of reproductive harm from exposure to Di-n-hexyl phthalate (DnHP). See www.P65Warnings.ca.gov Risk of cancer and reproductive harm from exposure to Di(2-ethylhexyl phthalate (DEHP). See www.P65Warnings.ca.gov See "?" or copy/paste www.P65Warnings.ca.gov in your browser. |
Insulation Resistance |
N/A 100 MΩ or more when 500 VDC megger is applied between the windings and the frame after rated motor operation under normal ambient temperature and humidity. |
Dielectric Strength |
N/A Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the frame for 1 minute after rated motor operation under normal ambient temperature and humidity. |
Temperature Rise |
N/A Temperature rise of windings are 126ºF (70ºC) or less measured by the resistance change method after rated motor operation with connection to gearhead. |
Insulation Class |
N/A Class B (266ºF [130ºC]) |
Overheat Protection |
N/A Built-in thermal protector (Automatic return type). Operating temperature, open: 266°F ± 9°F (130°C ± 5°C) close: 185°F ± 36°F (85°C ± 20°C) |
Ambient Temperature Range |
N/A Three-phase 200 VAC: 14ºF ~ 122ºF (-10ºC ~ 50ºC) (nonfreezing) Other voltage: 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
N/A 85% maximum (noncondensing) |
Degree of Protection |
N/A IP20 |
|
|
|
|
|
|
