| Items |
 BLU220A-5 Brushless Motor Speed Control System |
BLU220A-10 Brushless Motor Speed Control System |
BLU220A-15 Brushless Motor Speed Control System |
BLU220A-20 Brushless Motor Speed Control System |
BLU220A-30 Brushless Motor Speed Control System |
|||||
| Motor Frame Size | 2.36 in. | |||||||||
| Output Power | 20 W (1/38 HP) | |||||||||
| Power Supply | Single-Phase 100-115 VAC | |||||||||
| Shaft/Gear Type | Parallel Shaft Gearhead | |||||||||
| Gear Ratio (X:1) | 5 :1 | 10 :1 | 15 :1 | 20 :1 | 30 :1 | |||||
| Rated Torque | 3.90 lb-in | 7.9 lb-in | 12.3 lb-in | 15.9 lb-in | 23 lb-in | |||||
| Variable Speed Range (r/min) | 20 ~ 400 | 10 ~ 200 | 6.7 ~ 133.3 | 5 ~ 100 | 3.3 ~ 66.7 | |||||
| Permissible Load Inertia | 66 oz-in² | 270 oz-in² | 600 oz-in² | 1090 oz-in² | 2000 oz-in² | |||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 22 lb0.79 in. from Shaft End = 33 lb | 0.39 in. from Shaft End = 33 lb0.79 in. from Shaft End = 45 lb | 0.39 in. from Shaft End = 33 lb0.79 in. from Shaft End = 45 lb | 0.39 in. from Shaft End = 33 lb0.79 in. from Shaft End = 45 lb | 0.39 in. from Shaft End = 45 lb0.79 in. from Shaft End = 67 lb | |||||
| Permissible Thrust Load | 9.0 lb | |||||||||
| Permissible Thrust Load | - | |||||||||
| Speed Control Method (Select one of the following) | Panel mounted potentiometer | |||||||||
| Number of Speed Settings | 1 | |||||||||
| Instantaneous Stop | Yes | |||||||||
| Multi-Axes Control | No | |||||||||
| Alarm Output | Yes | |||||||||
| Position Control Mode | No | |||||||||
| Torque Limit Control | No | |||||||||
| Vertical Drive (Gravitational Operation) | No | |||||||||
| Max. Extension Length (m) | 10.5 | |||||||||
| RoHS Compliant | Yes | |||||||||
| Safety Standards | UL CSA EN CE | |||||||||
| List Price | - | |||||||||
|
|
||||||||||
