| Available to Ship1 | - {Contact your local sales office for more information.} |
Frame Size |
- 3.35 in85 mm |
Power Supply |
- DC Input |
Shaft |
- Single |
Gear Ratio (X:1) |
- 12 :1 |
Motor Location |
- Horizontal Mount |
Cable Direction |
- Left |
Electromagnetic Brake |
- Not Equipped |
Output Table Supporting Bearing |
- Cross-Roller Bearing |
Permissible Torque |
- 26 lb-in3 N·m |
Inertia |
- 11200x10-7 kg·m²61 oz-in² |
Permissible Speed (r/min) |
- 1800º/seconds (300 r/min) |
Max. Holding Torque |
- 15 lb-in1.8 N·m |
Repetitive Positioning Accuracy (arc sec) |
- ±30 arc sec (±0.008º) |
Angular Transmission Accuracy |
- 6 arc minute (0.1º) |
Permissible Moment Load |
- 10 N·m88 lb-in |
Runout of Output Table Surface |
- 0.015 mm0.0006 in. |
Runout of Output Table Inner (Outer) Diameter |
- 0.015 mm0.0006 in. |
Parallelism of Output Table |
- 0.03 mm0.0012 in. |
Degree of Protection |
- Actuator: IP40 (IP20 for motor connector) |
Insulation Class |
- 130 (B) [Recognized as 105 (A) by the UL Standards] |
Insulation Resistance (Actuator) |
- 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor Windings |
Dielectric Strength (Actuator) |
- Sufficient to withstand the following for 1 minute: Case - Motor Windings 1.5 kV, 50 Hz or 60 Hz |
Ambient Temperature (Actuator) |
- 0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) |
Ambient Humidity |
- 85% or less (Non-Condensing) |
Operating Atmosphere |
- Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids. |
Safety Standards |
- UL CE |
RoHS Compliant |
- This product does not contain substances that exceed the regulation values in the RoHS Directive |
|
|
|
|
|
|
|
|
