| Lead Time1 | - {Contact your local sales office for more information.} |
Frame Size |
- 80 mm |
Electromagnetic Brake |
- Equipped |
Linear Direction |
- Vertical |
Motor Type |
- DSC Series (Speed Control) |
Power Input |
- AC |
Power Supply |
- Single-Phase 220/230 VAC |
Speed Control Range |
- 50 Hz = 4.5 to 20 mm/s60 Hz = 4.5 to 23 mm/s |
Basic Rack Speed |
- 20 mm/s |
Max. Vertical Transportable Mass |
- 33 kg |
Stroke |
- 400 mm |
Thermal Class |
- 130 (B) |
Insulation Resistance |
- 100 MΩ or more when 500 VDC megger is applied between the windings and the case after rated operation under normal ambient temperature and humidity. |
Dielectric Strength |
- Sufficient to withstand 1.5 kVAC at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after rated operation under normal ambient temperature and humidity. |
RoHS Compliant |
- These products do not contain substances that exceed the regulation values in the RoHS Directive. |
Safety Standards |
- c-UL CCC CE |
CE Marking |
- Low Voltage Directives EMC Directive |
Temperature Rise |
- A gearhead or equivalent heat sink is connected to the motor and the winding temperature rise is measured at 144ºF (80ºC) or less using the resistance change method after rated operation with no load under normal ambient temperature and humidity. |
Overheat Protection Device |
-
Built-in Thermal Protector (automatic return type) Open: 130 ± 5ºC Close: 85 ± 20ºC |
Altitude |
- Max. of 1000 m (3300 ft.) above sea level |
Ambient Temperature |
- 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing) |
Ambient Humidity |
- 85% max. (non-condensing) |
Degree of Protection |
- IP20 |
|
|
|
|
