Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
This item is scheduled to be discontinued. Please contact our technical support team for a replacement.

Product Line Update

Unit of Measure

Specifications

Return Policy

 - This product cannot be cancelled or returned once the order has been processed.

Frame Size

 - 7.87 in

Power Supply

 - Three-Phase 200-230 VAC

Shaft

 - Single

Electromagnetic Brake

 - Not Equipped

Output Table Supporting Bearing

 - Cross-Roller Bearing

Permissible Torque

 - 440 lb-in

Inertia

 - 5000 oz-in²

Permissible Speed (r/min)

 - 110

Gear Ratio (X:1)

 - 18 :1

Max. Holding Torque

 - 310 lb-in

Resolution

 - 18000 P/R (0.02º)

Frequency

 - 50/60 Hz

Input Current

 - 2.20 A

Control Power Supply

 - 24 VDC ±5% 0.5 A

Repetitive Positioning Accuracy (arc sec)

 - ±15 arc sec (±0.004º)

Lost Motion

 - 2 arc minute (0.033°)

Angular Transmission Accuracy

 - 2 arc minute (0.033º)

Permissible Thrust Load

 - 900 lb

Permissible Moment Load

 - 880 lb-in

Runout of Output Table Surface

 - 0 in.

Runout of Output Table Inner (Outer) Diameter

 - 0 in.

Parallelism of Output Table

 - 0 in.

Degree of Protection

 - [Actuator] IP40 (IP20 for motor connector) [Driver] IP20

Insulation Class

 - 130 (B)

Insulation Resistance (Actuator)

 - 100 MΩ minimum when measured by a 500 VDC megger between the Case - Motor and Sensor Windings

Dielectric Strength (Actuator)

 - No abnormality is found with the following application for 1 minute: Case - Motor and Sensor Windings 1.5kV, 50 Hz or 60 Hz

Ambient Temperature (Actuator)

 - 0 ~ +50ºC (+32 ~ 122ºF)(non-freezing)
0 ~ +40ºC (+32 ~ 104ºF)(non-freezing) when home-sensor set (accessory is attached)

Ambient Temperature (Driver)

 - 0 ~ +50ºC (+32 ~ +122ºF) (non-freezing)

Ambient Humidity

 - 85% max. (non-condensing)

Operating Atmosphere

 - Use in an area without corrosive gases and dust. The product should not be exposed to water, oil or other liquids.

Safety Standards

 - CE

RoHS Compliant

 - Yes

Components

 - ARD-S (Driver) DGM200R-ARAC (Actuator)

Driver Specifications

Max Input Pulse Frequency (Position Control)

 - Line driver output by programmable controller: 500 kHz (When the pulse duty is 50%)
Open-collector output by programmable controller when general-purpose cable (sold separately) is used: 250 kHz (When the pulse duty is 50%)

Dimensions


 

Performance


 

 

 

 

System