Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
The next generation KIIS Series offers an optimally designed, high efficiency next generation three-phase motor that incorporates higher strength gears that maximizes the motor performance.
  • Higher Permissible Torque
  • Low Noise
  • IP66
Unit of Measure

Specifications

Lead Time1 - {Contact your local sales office for more information.}

Product Line

 - Oriental Motor®

Motor Type

 - Induction

Frame Size

 - 3.54 in

Output Power

 - 100 W (1/8 HP)

Voltage (VAC)

 - Three-Phase 220/230/240 VAC

Frequency (Hz)

 - 60 50

Current

 - 0.49 A [50 Hz]
0.46 A [220 VAC, 60 Hz]
0.45 A [230 VAC, 60 Hz]

Type

 - Terminal Box

Electromagnetic Brake

 - Not Equipped

Shaft/Gear Type

 - Right-Angle Hollow Shaft (Stainless Steel) Gearhead

Gear Ratio (X:1)

 - 10 :1

Output Shaft Diameter

 - 15 mm

Rated Torque

 - 36 lb-in  

Starting Torque

 - 36  

Rated Speed (rpm)

 - 150 [50 Hz] 180 [60 Hz]

Permissible Load Inertia

 - Instantaneous Stop = 360 oz-in²1090 oz-in²

Permissible Overhung Load

 - 0.39 in. from Shaft End = 93 lb0.79 in. from Shaft End = 81 lb

Permissible Thrust Load

 - 24 lb

Components

 - 5H10S, JH Series Right-Angle Shaft Gearhead (10:1) (Metric Shaft) ($397.00)
5IK100VKEST, 100 W (1/8 HP) KII / KIIS Series AC Motor & Gear Motors Induction Pinion Shaft Motor (Three-Phase 220/230 VAC) ($191.00)

RoHS Compliant

 - These products do not contain substances that exceed the regulation values in the RoHS Directive.

Safety Standards

 - UL CCC CE

CE Marking

 - Low Voltage Directives

Insulation Resistance

 - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.

Dielectric Strength

 - Sufficient to withstand 1.5 kV at 50 Hz or 60 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.

Temperature Rise

 - A gearhead or equivalent heat sink [7.87 x 7.87 in. (200 x 200 mm), 0.20 in. (5 mm) thick, material aluminum] is connected to the motor and the winding temperature rise is measured at 144ºF (80ºC) or less using the resistance change method after

Thermal Class

 - 130 (B)

Ambient Temperature Range

 - 14ºF ~ 104ºF (-10ºC ~ 40ºC) (nonfreezing)

Ambient Humidity

 - 85% or less (noncondensing)

Degree of Protection

 - IP66

Dimensions


 

Product Number


 

System


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.