Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
This item has been discontinued. Please contact our technical support team for a replacement.
Unit of Measure

Specifications

Return Policy

 - This product cannot be cancelled or returned once the order has been processed.

Product Line

 - Oriental Motor®

Motor Type

 - Brushless DC Motor

Output Power

 - 60 W (1/12 HP)

Power Supply

 - Single-Phase 200-240 VAC

Rated Input Current

 - 1.2 A

Shaft/Gear Type

 - Round Shaft (No Gearhead)

Electromagnetic Brake

 - Equipped

Control Module Included

 - No

Variable Speed Range (r/min)

 - 100 ~ 4000

Rotor Inertia

 - 1.31 oz-in2

Permissible Overhung Load

 - 0.39 in. from Shaft End = 24 lb0.79 in. from Shaft End = 29 lb

Permissible Thrust Load

 - The permissible thrust load should not be greater than half the motor mass.

Instantaneous Stop

 - Yes

Alarm Output

 - Yes

Position Control Mode

 - No

Vertical Drive (Gravitational Operation)

 - Yes

Max. Extension Length (m)

 - 20.40

Components

 - BLEM46M2-A (Motor) BLED6CM (Driver)

RoHS Compliant

 - Yes

Safety Standards

 - UL CSA CE

CE Marking

 - Low Voltage Directives EMC Directives

Thermal Class

 - CSA standards: 105 (A), EN standards: 120 (E) UL

Insulation Resistance (Motor)

 - 100 MΩ or more when 500 VDC megger is applied between the windings and the case after continuous operation under normal ambient temperature and humidity.

Dielectric Strength (Motor)

 - Sufficient to withstand 1.5 kVAC at 50 Hz applied between the windings and the case for 1 minute after continuous operation under normal ambient temperature and humidity.

Ambient Temperature Range

 - 32ºF ~ 122ºF (0ºC ~ 50ºC), nonfreezing

Ambient Humidity

 - 85% or less, noncondensing

Operating Atmosphere

 - No corrosive gases or dust. Cannot be used in a radioactive area, magnetic field, vacuum or other special environment.

Degree of Protection

 - [Driver] IP20 [Motor] IP65

Brake Specifications

Brake Type

 - Active when the power is off, automatically controlled by the driver

Static Friction Torque

 - 28 oz-in

Speed Control Features

Speed Control Method (Select one of the following)

 - Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W)

Number of Speed Settings

 - 2

Multi-Speed Setting Method

 - 1 speed set by the internal speed potentiometer and 1 speed set by the external speed potentiometer (20 kΩ, 1/4 W) or external DC voltage (0 ~ 5 VDC)

Multi-Axes Control

 - Yes