Oriental Motor

ORIENTAL MOTOR U.S.A. Corp.
570 Alaska Avenue
Torrance, CA 90503
1-800-GO-VEXTA (468-3982)

Print Back
The DRS2 Series uses the αSTEP AZ Series equipped with the Absolute Sensor for the driving motor. The Absolute Sensor is a mechanical multi-turn Absolute Sensor, so an external sensor is not required. This helps to save space and reduce wiring, as well as more compact and lightweight design of the equipment. The built-in controller (stored data) allows for easy networking and simplified multi-axis control.
  • Controller connection options: 1: I/O, 2: Modbus (RTU/RS-485) or 3: FA Network (network
  • more
Unit of Measure

Specifications

Available to Ship1 Contact you local saless office for more information

Motor Type

AZ Series with Absolute Sensor

Driver Type

Built-in Controller (Stored Data Type)

Power Supply

24/48 VDC

Actuator Frame Size

1.65 in.

Drive Method

Rolled Ball Screw

Repetitive Positioning Accuracy

±0.0004 in.

Lost Motion

0.002 in.  

Guide

Not Equipped

Electromagnetic Brake

Equipped

Lead

0.315 in.

Stroke

1.57 in.

Max. Vertical Transportable Mass

11 lb

Max. Horizontal Transportable Mass

22 lb

Max. Speed

7.87 in/s

Max. Thrust Force

11.2 lb

Push Force

22 lb

Max. Holding Force

11.2 lb

Components

DRSM42-04A8AZMK (Actuator)
AZD-KD (Driver)

RoHS Compliant

These products do not contain substances that exceed the regulation values in the RoHS Directive.

Safety Standards

UL CE

Insulation Resistance

[Actuator] 100 MΩ or more when 500 VDC megger is applied between the motor windings and case.
[Driver] The measured value is 100 MΩ or more when a 500 VDC megger is applied between the FG Terminal - Power Input Terminal.

Dielectric Strength

[Actuator] Sufficient to withstand 1 kV at 50 Hz or 60 Hz applied between the motor windings and case for 1 minute.

Ambient Temperature Range

32ºF ~ 104ºF (0ºC ~ 40ºC) (nonfreezing)

Ambient Humidity

85% or less (noncondensing)

Driver Specifications

Number of Positioning Data Sets

256

RS-485 Communication

Protocol

Modbus RTU Mode

Electrical Characteristics

EIA-485 Based, Straight Cable
Use shielded twisted-pair cables (TIA/EIA-568B CAT5e or better recommended)> The maximum total extension length is 50 m.

Transmission/Reception Mode

Half duplex and start-stop synchronization (data: 8 bits, stop it: 1 bit or 2 bits, parity: none, even or odd)

Baud Rate

Select from 9600 bps / 19200 bps / 38400 bps / 57600 bps / 115200 bps / 230400 bps

Connection Type

Up to 31 units can be connected to a single programmable controller (master unit).

Dimensions


 

 

Positioning


 

System


 

  • 1 Quoted Ship Date for orders placed before 12:00 pm PST. Quantities may affect Shipping Date.