| Items |
 BX230A-A Brushless DC Motor Speed Control System |
 BX230AM-A Brushless DC Motor Speed Control System |
BX230C-A Brushless DC Motor Speed Control System |
BX230CM-A Brushless DC Motor Speed Control System |
 BX460A-A Brushless DC Motor Speed Control System |
|||||
| Motor Frame Size | 2.36 in.60 mm | 2.36 in.60 mm | 2.36 in.60 mm | 2.36 in.60 mm | 3.15 in.80 mm | |||||
| Output Power | 30 W (1/25 HP) | 30 W (1/25 HP) | 30 W (1/25 HP) | 30 W (1/25 HP) | 60 W (1/12 HP) | |||||
| Power Supply | Single-Phase 100-115 VAC | Single-Phase 100-115 VAC | Single-Phase/Three-Phase 200-230 VAC | Single-Phase/Three-Phase 200-230 VAC | Single-Phase 100-115 VAC | |||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | |||||||||
| Gear Ratio (X:1) | ||||||||||
| Output Shaft Diameter | 8 mm | 8 mm | 8 mm | 8 mm | 10 mm | |||||
| Rated Torque | 0.88 lb-in0.10 N·m | 0.88 lb-in0.10 N·m | 0.88 lb-in0.10 N·m | 0.88 lb-in0.10 N·m | 1.75 lb-in0.20 N·m | |||||
| Electromagnetic Brake | Not Equipped | Equipped | Not Equipped | Equipped | Not Equipped | |||||
| Brake Type | Active when the power is off, automatically controlled by the driver. | Active when the power is off, automatically controlled by the driver. | ||||||||
| Static Friction Torque | 14.20 oz-in | 14.20 oz-in | ||||||||
| Control Module Included | No | |||||||||
| Variable Speed Range (r/min) | 30 ~ 3000 | |||||||||
| Permissible Load Inertia | 8.20 oz-in²1.5 x 10-4 kg·m² | 8.20 oz-in²1.5 x 10-4 kg·m² | 8.20 oz-in²1.5 x 10-4 kg·m² | 8.20 oz-in²1.5 x 10-4 kg·m² | 16.40 oz-in²3 x 10-4 kg·m² | |||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 19.6 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 87.2 N20 mm from Shaft End = 107 N | 0.39 in. from Shaft End = 19.6 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 87.2 N20 mm from Shaft End = 107 N | 0.39 in. from Shaft End = 19.6 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 87.2 N20 mm from Shaft End = 107 N | 0.39 in. from Shaft End = 19.6 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 87.2 N20 mm from Shaft End = 107 N | 0.39 in. from Shaft End = 26 lb0.79 in. from Shaft End = 30 lb10 mm from Shaft End = 117 N20 mm from Shaft End = 137 N | |||||
| Permissible Thrust Load | ||||||||||
| Permissible Thrust Load | The permissible thrust load should not be greater than half the motor mass. | |||||||||
| Speed Control Method (Select one of the following) | Internal potentiometer External DC voltage External potentiometer (20kΩ, 1/4W) | |||||||||
| Number of Speed Settings | 2 | |||||||||
| Multi-Speed Setting Method | 1 speed set by the internal speed potentiometer and 1 speed set by the external speed potentiometer (20 kΩ, 1/4 W) or external DC voltage (0 ~ 5 VDC) | |||||||||
| Instantaneous Stop | Yes | |||||||||
| Multi-Axes Control | Yes | |||||||||
| Alarm Output | Yes | |||||||||
| Position Control Mode | No | |||||||||
| Torque Limit Control | No | |||||||||
| Torque Limiting Setting Range | ||||||||||
| Torque Limiting Setting Methods | ||||||||||
| Vertical Drive (Gravitational Operation) | No | Yes | No | Yes | No | |||||
| Max. Extension Length (m) | 20 | |||||||||
| RoHS Compliant | Yes | |||||||||
| Safety Standards | UL CSA EN CE | |||||||||
| List Price | ||||||||||
|
|
||||||||||
