The US series combines a control unit and an AC speed control motor. Connection between the motor and control unit is simplified by and easy-to-use connector. The US series is designed for applications where remote control of the motor speed and easy installation are required.
| Items |
 US206-001U2 AC Motor Speed Control System |
US206-002E2 AC Motor Speed Control System |
 US206-401U2 / 2GN3SA AC Speed Control System |
US206-401U2 / 2GN3.6SA AC Speed Control System |
US206-401U2 / 2GN5SA AC Speed Control System |
|||||
| Frame Size | 2.36 in60 mm | |||||||||
| Output Power | 6 W (1/125 HP) | |||||||||
| Power Supply | Single-Phase 110/115 VAC | Single-Phase 220/230 VAC | Single-Phase 110/115 VAC | Single-Phase 110/115 VAC | Single-Phase 110/115 VAC | |||||
| Frequency (Hz) | 60 | 60 50 | 60 | 60 | 60 | |||||
| Current | 0.28 A | 0.13 A | 0.28 A | 0.28 A | 0.28 A | |||||
| Shaft/Gear Type | Round Shaft (No Gearhead) | Round Shaft (No Gearhead) | Parallel Shaft Gearhead | Parallel Shaft Gearhead | Parallel Shaft Gearhead | |||||
| Gear Ratio (X:1) | 3 :1 | 3.6 :1 | 5 :1 | |||||||
| Output Shaft Diameter | 6 mm | 6 mm | 5/16 in. | 5/16 in. | 5/16 in. | |||||
| Permissible Torque | 0.44 lb-in 0.05 N·m | 0.41 lb-in [50 Hz] 0.44 lb-in [60 Hz] 0.047 N·m [50 Hz] 0.05 N·m [60 Hz] | 1.06 lb-in 0.12 N·m | 1.32 lb-in 0.15 N·m | 1.77 lb-in 0.2 N·m | |||||
| Variable Speed Range (r/min) | 90 ~ 1600 | 90 ~ 1400 [50 Hz] 90 ~ 1600 [60 Hz] | 30 ~ 533 | 25 ~ 444 | 18 ~ 320 | |||||
| Permissible Load Inertia | 3.06 oz-in²0.558 x 10-4 kg·m² | 4.41 oz-in²0.80352 x 10-4 kg·m² | 8.50 oz-in²1.55 x 10-4 kg·m² | |||||||
| Permissible Overhung Load | 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 110 N | 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 24 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 110 N | 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N | 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N | 0.39 in. from Shaft End = 11.2 lb0.79 in. from Shaft End = 18 lb10 mm from Shaft End = 50 N20 mm from Shaft End = 80 N | |||||
| Permissible Thrust Load | 6.7 lb30 N | 6.7 lb30 N | 6.7 lb30 N | |||||||
| Permissible Thrust Load | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. | Avoid thrust load as much as possible. If thrust load is unavoidable, keep it to half or less of the motor mass. | ||||||||
| Speed Control Method (Select one of the following) | Panel mounted potentiometer | |||||||||
| Number of Speed Settings | 1 | |||||||||
| Instantaneous Stop | No | |||||||||
| Multi-Axes Control | No | |||||||||
| Alarm Output | No | |||||||||
| Position Control Mode | No | |||||||||
| Torque Limit Control | No | |||||||||
| Vertical Drive (Gravitational Operation) | No | |||||||||
| Max. Extension Length (m) | 4.75 | |||||||||
| RoHS Compliant | Yes | |||||||||
| Safety Standards | UL CCC EN CE | UL CCC EN CE | UL CSA CCC EN CE | UL CSA CCC EN CE | UL CSA CCC EN CE | |||||
| Dimensions |
|
|
||||||||
|
|
||||||||||
